3. Projecting an Image (Basic Operation)

This section describes how to turn on the projector and to project a picture onto the screen.

￿Turning on the Projector

NOTE:

The projector has two power switches: a main power switch and a POWER (ON/STAND BY) button (POWER ON and OFF on the remote control).

When plugging in or unplugging the supplied power cable, make sure that the main power switch is pushed to the off (￿) position. Failure to do so may cause damage to the projector.

The projector has a feature to prevent itself from being used by unauthorized individuals. To use this feature, register a keyword. See "Security" in "Setup" on page 48 for more details.

1.To turn on the main power to the projector, press the Main Power switch to the on position ( I ).

The POWER indicator will light orange.

See the Power Indicator section on page 123 for more details.

LAMP

STATUS

POWER

2.Press the POWER (ON/STAND BY) button on the projector cabinet or POWER ON button on the remote control for a minimum of 2 seconds when the power indicator turns a steady green, and the projector is ready to use.

After you turn on your projector, ensure that the computer or video source is turned on and that your lens cap is removed.

 

MENU

 

SELECT

E

 

N

XIT

T

ER

E

PC CARD

SOURCE

AUTO ADJUST

LAMP

STATUS

3D REFORM ON/STAND BY POWER

OFF ON

POWER

LASER

MAGNIFYPAGE

 

UP

 

POINTER

 

DOWN

 

MENU

R

E

E

X

T

I

N

T

E

 

 

R-CLICK

Standby

Blinking for

Power On

one minute

 

 

LAMP

LAMP

LAMP

STATUS

STATUS

STATUS

POWER

POWER

POWER

 

ON/STAND BY

 

Steady orange

Blinking green

Steady green

light

light

light

Press this button for a minimum of 2 seconds.

See page 123 for more details.

NOTE: When no signal is available, a blue, black or logo screen is displayed.

28