2. Installation and Connections

Connecting Your DVD Player with Component Output

COMPUTER 1 IN

 

AUDIO OUT

 

PC CARD

LAN USB

 

 

R AUDIO IN L

VIDEO IN S-VIDEO IN PC CONTROL COMPUTER 1 IN AUDIO IN

COMPUTER 2 IN

MONITOR OUT

AC IN

Optional 15-pin - to - RCA (female)￿3 cable (ADP-CV1)

Audio Equipment

Component video RCA￿3

AUDIO IN

L R

cable (not supplied)

 

DVD player

Y Cb Cr

L R

Component

AUDIO OUT

Audio cable (not supplied)

You can connect your projector to a DVD player with component output or Video output. To do so, simply:

1.Turn off the power to your projector and DVD player.

2.If your DVD player has a component video (Y,Cb,Cr) output, use a commercially available component video cable (RCA￿3) and the optional 15-pin-to-RCA (female)￿3 cable to connect your DVD player to the COMPUTER IN connector on the projector.

For a DVD player without component video (Y,Cb,Cr) output, use an S-Video cable (not provided) to connect an S- Video output of the DVD player to the Video Input of the projector.

3.Connect the supplied power cable. See page 26.

4.Turn on the projector and DVD player.

A component signal will be automatically displayed. If not, from the menu, select [Setup] [Options] [Signal Select] [Computer 1 (or 2)] [Component].

NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements.

20