2. Installation and Connections

Connecting the Supplied Power Cable

Connect the supplied power cable to the projector.

First connect the supplied power cable's three-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cable in the wall outlet.

To wall outlet

Make sure that the prongs are fully inserted into both the AC IN and the wall outlet.

CAUTION:

Do not unplug the power cable from the wall outlet under any one of the following circumstances. Doing so can cause damage to the projector or PC card:

While the projector's lamp is lighted.

While the cooling fans are running. The cooling fans continue to work for 90 seconds after the projector is turned off.

While the PC CARD Access Indicator lights. Doing so can damage your PC memory card.

26