2. Installation and Connections
NOTE: The LT265/LT245 is not compatible with video decoded outputs of either the NEC
NOTE: An image may not be displayed correctly when a Video or
This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.
*When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly: Project an image to fill the screen and then press the AUTO ADJ button on the remote control or the AUTO ADJUST button on the projector cabinet.
*When noise appears on the sides of the screen:
Use the Overscan feature to display the image correctly.
Be sure to change the Overscan to 0% before pressing the AUTO ADJ or AUTO ADJUST button, otherwise an image may be displayed with its sides cut off.
To connect SCART output (RGB)
Projector
COMPUTER 1 IN
Video equipment such as DVD player
| AUDIO OUT |
| |
PC CARD | LAN USB |
|
|
R AUDIO IN L | VIDEO IN | COMPUTER 2 IN | MONITOR OUT |
AC IN
Female
Commercially available SCART cable
Before connections: An exclusive SCART adapter
NOTE: Audio signal is not available for this connection.
1.Turn off the power to the projector and your video equipment.
2.Use the NEC
3.Connect the supplied power cable. See page 26.
4.Turn on the power to the projector and your video equipment.
5.Use the COMPUTER 1 button on the remote control to select the COMPUTER 1 IN connector.
6.Press the MENU button on the remote control to display the menu.
7.From the menu, select [Setup] → [Options] → [Signal Select] → [Computer 1] → [Scart].
SCART is a standard European
NOTE: The
18