NEC LT280, LT380 NOTE:, Characters, (→ page 107), Inserts a space, [Projector Name], Advances to the next, Cancels the selection, Executes the selection

6. Using On-Screen Menu

[Projector Name]

Specify a unique projector name. Press to display the software keyboard and type in. Up to 16 alphanumeric characters can be used. After entering a name, select [OK] and press the ENTER button.

Using Software Keyboard

1 to 0 and
Characters .......	Use to type in password or keyword.
MODE ....................	Selects one of three modes for alphabet and special characters.
SP .........................	Inserts a space
BS .........................	Deletes one character backward
￿ ..........................	Returns to the previous
￿ ..........................	Advances to the next
OK .........................	Executes the selection
Cancel ...................	Cancels the selection

Selecting Communication Speed [Communication Speed]

This feature sets the baud rate of the PC Control port (Mini D-Sub 9 Pin). It supports data rates from 4800 to 38400 bps. The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending on the equipment, a lower baud rate may be recommended for long cable runs).

Your selected communication speed will not be affected even when [Reset] is done from the menu.

Selecting Power-saving in [Standby Mode]The projector has two standby modes: [Normal] and [Power-saving].

Power-saving mode is the mode that allows you to put the projector in the power-saving condition which consumes less power than the Normal mode. The projector is preset for Normal mode at the factory.

NOTE:

•The HTTP server functions are not available during Power-saving mode.•The MONITOR OUT function is not available during Power-saving mode.

•Control through the PC Control connector and LAN mode is not available during Power-saving mode. For PC control and LAN

mode of the projector it is recommended to leave the projector in the Normal mode.

• Normal mode .......................	Power indicator: Orange light/ Status indicator: Green light
Power-saving mode .............	Power indicator: Orange light/Status indicator: Off
(→ page 107)

93