6. Using On-Screen Menu

[Video]Turning On/Off 3 Dimension Separation [3D Y/C Separation]This function turns on or off the 3 dimensional separation feature.

Off

...............................

Turns off the function.

On

Still .................Recommended for a still image.

 

Normal ............

The projector detects and corrects the image automatically.

 

Movie ..............

Recommended for a moving image.

TIP: When the image is poor quality, turn on [3D Y/C Separate]. If there is still poor quality, try turning off [Deinterlace] or try turning off [3D Y/C Separate] and select [Normal] in [Deinterlace].

NOTE: This feature is available for NTSC3.58 of Video signal only.Setting Vertical Edges [Vertical Enhancer]This function enhances the vertical edges around objects in the image.NOTE: This function is not available for an RGB, HDTV and Component signal.Selecting Interlace or Deinterlace [Deinterlace]This function allows you to select between "Interlace" and "Deinterlace".

Off

...............................

Project the interlaced signal.

On

Still .................

Select when a still image is displayed. When this option is selected for a moving image, jitter or artifacts

 

 

can be seen.

 

Normal ............

The projector automatically determines a still or moving image to display a clear picture. If selecting

 

 

[Normal] causes excess jitter or artifacts, select [Movie].

 

Movie ..............

Select when a moving image is displayed. This will eliminate jitter and artifacts in a moving image. This

 

 

option is available only for SDTV.
Setting Telecine Mode [Telecine]Use 3:2 pull down correction to eliminate jitter and artifacts in video.

NOTE: This feature is available only when [Deinterlace] is turned on and an SDTV signal is selected.

Off

.....................................

Turns off the Telecine mode.

On

2-2/2-3 Auto .........Detects pull-down correction method.

 

2-2 On ..................

Uses 2-2 pull-down correction method

 

2-3 On ..................

Uses 2-3 pull-down correction method

75