3. Projecting an Image (Basic Operation)

￿Correcting Keystone Distortion

Auto Keystone Correction

The Auto Keystone correction feature will correct vertical distortion of a projected image on the screen. No special operation required. Just put the projector on a flat surface.

To use the Auto Keystone function, first you must select [Auto] in [Keystone] from the menu.

Manual Keystone CorrectionYou can also correct keystone distortion manually.To do so:1.Press the 3D REFORM button on the remote control or the projector cabinet.The Keystone screen will be displayed on the screen.• When [Auto] is selected in [Keystone] from the menu, start from step 3.

2.Press the SELECT ￿ button to select [Vertical] and then use the SELECT ￿ or ￿ so that the left and right sides of the projected im- age are parallel.

* Adjust the vertical keystone distortion.

3.Align the left (or right) side of the screen with the left (or right) side of the projected image.

•Use the shorter side of the projected image as the base.•In the right example, use the left side as the base.

NOTE: When [Manual] is selected in [Keystone] from the menu, project an image adjusting projector position so that the screen is smaller than the area of the projected image. See page 77 for selecting [Manual] in [Keystone].

4.Press the SELECT ￿ button to select [Horizontal] and then use the SELECT ￿ or ￿ so that the top and bottom sides of the projected image are parallel.

• Adjust the horizontal keystone distortion.

Projected area

Screen frame

Align left side

29