NEC LT280, LT380 6. Using On-ScreenMenu, Repeat steps, Use the SELECT, Press the SELECT, Changes are stored until you adjust it again

6. Using On-Screen Menu

￿Using the Menus

1. Press the MENU button on the remote control or the projector cabinet to display the menu.

Submenu Submenu window

Main menu

Currently available buttons

NOTE: The commands such as ￿￿, ENTER, EXIT in the gray bar show available buttons for your operation.

2.Press the SELECT ￿￿ buttons on the remote control or the projector cabinet to display the submenu.

3.Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the first tab.

4.Use the SELECT ￿￿ buttons on the remote control or the projector cabinet to select the item you want to adjust or set.

You can use the SELECT ￿￿ buttons on the remote control or the projector cabinet to select the tab you want.

NOTE: You can select a tab only when the tab color is orange.

5.Press the ENTER button on the remote control or the projector cabinet to display the submenu window.

6.Adjust the level or turn the selected item on or off by using the SELECT ￿￿￿￿ buttons on the remote control or the projector cabinet.

Changes are stored until you adjust it again.

7.Repeat steps 2 -6 to adjust an additional item, or press the EXIT button on the remote control or the projector cabinet to quit the menu display.

NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings.

62