5. Using On-Screen Menu

Setting up the Projector for a Wired LAN Connection [WIRED LAN]

Important

•Consult with your network administrator about these settings.

•When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the projec- tor. (→ page 110)

TIP: The network settings you make will not be affected even when [RESET] is done from the menu.

[WIRED LAN]

[DISABLE]

Wired LAN connection will be turned off.

 

 

 

 

[ENABLE]

Wired LAN connection will be turned on.

 

 

 

 

[SETTINGS]

[DHCP]

ON��������������������������

IP address, subnet mask, and gateway will

 

 

 

be automatically assigned to the projector

 

 

 

from your DHCP server.

 

 

OFF�������������������������

Specify IP address, subnet mask, and gate-

 

 

 

way assigned by your network administra-

 

 

 

tor.

 

 

 

 

[IP ADDRESS]

Set your IP address of the network connected to the

 

 

projector.

 

 

 

 

 

[SUBNET MASK]

Set your subnet mask number of the network connected

 

 

to the projector.

 

 

 

 

 

[GATEWAY]

Set the default gateway of the network connected to the

 

 

projector.

 

 

 

 

 

 

[AUTO DNS]

ON��������������������������

DHCP server will automatically assign IP

 

 

 

address of DNS server connected to the

 

 

 

projector.

 

 

OFF�������������������������

Set your IP address of DNS server connected

 

 

 

to the projector.

 

 

 

 

91