1. Introduction
Battery Installation
1 Press firmly and slide the battery cover off.
Remote Control Precautions
2 Install new batteries (AAA). Ensure that you have the batteries’ polarity (+/−) aligned correctly.
3Slip the cover back over the bat- teries until it snaps into place. Do not mix different types of batteries or new and old batteries.
•Handle the remote control carefully.
•If the remote control gets wet, wipe it dry immediately.
•Avoid excessive heat and humidity.
•Do not short, heat, or take apart batteries.
•Do not throw batteries into fire.
•If you will not be using the remote control for a long time, remove the batteries.
•Ensure that you have the batteries’ polarity (+/−) aligned correctly.
•Do not use new and old batteries together, or use different types of batteries together.
•Dispose of used batteries according to your local regulations.
Operating Range for Wireless Remote Control
Remote control
Remote control 
7 m/22 feet
30°
30°
Remote sensor on projector cabinet
30°
30° | TIP: | |
| ||
| M260XS/M300WS/M260WS): | |
7 m/22 feet | The front remote sensor is located on the | |
front left of the cabinet. | ||
|
•The infrared signal operates by
•The projector will not respond if there are objects between the remote control and the sensor, or if strong light falls on the sensor. Weak batteries will also prevent the remote control from properly operating the projector.
11