2. Projecting an Image (Basic Operation)
Turning on the Projector
1.Uncover the lens by sliding the lens cover (M350X/ M300X/M260X/M230X/M300W/M260W/M420X/M420XV) or removing the lens cap (M350XS/M300XS/M260XS/ M300WS/M260WS)
[M350XS/M300XS/M260XS/M300WS/M260WS]
•Do not remove the lens cap by pulling on the string.
Doing so can cause mechanical damage to the part around the lens.
2.Press the 
(POWER) button on the projector cabinet or the POWER ON button on the remote control.
The POWER indicator will turn to blue and the projector will become ready to use.
TIP:
•When the message “Projector is locked! Enter your password.” is displayed, it means that the [SECURITY] feature is turned on. (→ page 32)
After you turn on your projector, ensure that the computer or video source is turned on and that the lens cover is open.
NOTE: When no input signal is present, the
Lens cover
Lens cap
Standby | Blinking | Power On |
Steady orange light | Blinking blue light | Steady blue light |
(→ page 127)
16