3. Convenient Features

• ALERT MAIL

 

 

 

 

 

 

 

ALERT MAIL (English

 

This option will notify your computer of lamp replace time or error messages via e-mail

only)

 

when using wireless or wired LAN.

 

 

Placing a checkmark will turn on the Alert Mail feature.

 

 

Clearing a checkmark will turn off the Alert Mail feature.

 

 

Sample of a message to be sent from the projector:

 

 

The lamp and filters are at the end of its usable life. Please replace the lamp and

 

 

filters.

 

 

Projector Name: NEC Projector

 

 

Lamp Hours Used: 100 [H]

 

 

 

 

SENDER’S ADDRESS

 

Enter sender’s address.

 

 

 

 

SMTP SERVER NAME

 

Enter the SMTP server name to be connected to the projector.

 

 

 

 

RECIPIENT’S ADDRESS

 

Enter your recipient’s address. Up to three addresses can be entered.

1,2,3

 

 

 

 

 

 

 

TEST MAIL

 

Send a test mail to check whether your settings are correct or not

 

 

 

 

 

 

NOTE:

 

 

• If you execute a test, you may not receive an Alert mail. Should this happen, check if network

 

 

settings are correct.

 

 

• If you entered an incorrect address in a test, you may not receive an Alert mail. Should this

 

 

happen, check if the Recipient’s Address is correct.

 

 

 

 

 

 

 

 

SAVE

 

Click this button to reflect the above settings.

 

 

 

 

• NETWORK SERVICE

 

 

 

 

 

 

PJLink PASSWORD

 

Set a password for PJLink*. A password must be 32 characters or less. Do not forget

 

 

your password. However, if you forget your password, consult with your dealer.

 

 

 

HTTP PASSWORD

 

Set a password for HTTP server. A password must be 10 characters or less.

 

 

 

AMX BEACON

 

Turn on or off for detection from AMX Device Discovery when connecting to the network

 

 

supported by AMX’s NetLinx control system.

 

 

TIP:

 

 

When using a device that supports AMX Device Discovery, all AMX NetLinx control system will rec-

 

 

ognize the device and download the appropriate Device Discovery Module from an AMX server.

 

 

Placing a checkmark will enable detecting the projector from AMX Device Discovery.

 

 

Clearing a checkmark will disable detecting the projector from AMX Device Discovery.

 

 

 

 

*What is PJLink?

PJLink is a standardization of protocol used for controlling projectors of different manufacturers.This standard protocol is established by Japan Business Machine and Information System Industries Association (JBMIA) in 2005. The projector supports all the commands of PJLink Class 1.

Setting of PJLink will not be affected even when [RESET] is done from the menu.

• INFORMATION

WIRED LAN

Display a list of settings of wired LAN connection.

 

 

WIRELESS LAN

Display a list of settings of wireless LAN connection.

 

 

UPDATE

Reflect settings when they are changed.

 

 

49