2. Projecting an Image (Basic Operation)

Optimizing Computer Signal Automatically

Adjusting the Image Using Auto Adjust

Optimizing a computer image automatically. (COMPUTER1/COMPUTER2)

Press the AUTO ADJ. button to optimize a computer image automatically.

This adjustment may be necessary when you connect your computer for the first time.

[Poor picture]

[Normal picture]

NOTE:

Some signals may take time to display or may not be displayed correctly.

•If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE] manually. (→ page 77, 78)

Turning Up or Down Volume (not available on M420XV)

Sound level from the speaker can be adjusted.

Increase volume

Decrease volume

TIP: When no menus appear, the and buttons on the projector cabinet work as a volume control.

NOTE:

• Volume control is not available with the or button when an image is enlarged by using the D-ZOOM (+) button or when the menu is displayed.

• Volume control is not available with the or button when VIEWER is used.

TIP: The [BEEP] sound volume cannot be adjusted. To turn off the [BEEP] sound, from the menu, select [SETUP] → [OPTIONS (1)] → [BEEP] → [OFF].

26