3. Convenient Features

2.Press the  button.

The area of the magnified image will be moved

3. Press the D-ZOOM (−) button.

Each time the D-ZOOM (−) button is pressed, the image is reduced.

NOTE:

• The image will be enlarged or reduced at the center of the screen.

• Displaying the menu will cancel the current magnification.

Changing Eco Mode/Checking Energy-Saving Effect

Using Eco Mode [ECO MODE]

The ECO MODE (ECO1 and ECO2) increases lamp life, while lowering power consumption and cutting down on CO2 emissions.

Four brightness modes of the lamp can be selected: [OFF], [AUTO ECO], [ECO1] and [ECO2] modes.

[ECO MODE]

 

Description

Status of LAMP indicator

 

 

 

 

 

[OFF]

 

This is the default setting (100% Brightness).

Off

 

 

 

 

 

[AUTO ECO]

 

Lamp power consumption will be changed between

Steady

 

 

[OFF] and [ECO1] automatically according to picture

Green light

 

 

level

 

 

 

 

 

 

 

 

NOTE: A bright gradation may be less visible depending on

 

 

 

the image.

 

 

 

 

 

 

 

 

 

 

 

[ECO1]

 

Low lamp power consumption (approx. 75% Brightness

 

 

 

on M350X/M300W/M420X/M420XV/M350XS/M300XS/

 

 

 

M300WS/M260WS and approx. 80% Brightness on

 

 

 

M300X/M260X/M230X/M260W/M260XS).

 

 

 

 

 

 

[ECO2] (M300X,

 

Lower lamp power consumption than [ECO1] mode (ap-

 

M260X, and

 

prox. 50% Brightness on M300X/M260X/M260XS)

 

M260XS only)

 

 

 

 

 

 

 

 

 

To turn on the [ECO MODE], do the following:

1.Press the ECO Button on the remote control to display [ECO MODE] screen.

2.Press the ECO button again to select a mode you wish.

•Each time the ECO button is pressed, the choices will be changed:

OFF → AUTO ECO → ECO1 (→ ECO2) → OFF

•When the projector is in ECO mode, the LAMP indicator will light green.

TIP:

• The leaf symbol at the bottom of the menu shows the current selection of ECO mode.

30