1. What’s in the Box? and the Names of the Projector Parts
1-3-5. Control panel
3 | 1 | 2 | 8 | 9 |
MMS
STATUS
4 | 10 | 11 12 13 | 14 15 | 16 | 17 18 | 19 | 20 5 6 | 7 |
1. Remote control light reception unit
This receives signals from the remote control.
2. BACKLIGHT switch
Operate this switch to turn on/off the back light of the LCD screen and operation panel.
3. MMS STATUS indicator
This indicates the link status of the optional
Off | When not using |
|
|
Green lighting | When linked to |
|
|
Orange lighting | When linked to external |
|
|
Green or Orange blinking | Preparing link with |
|
|
Red blinking | When a link error occurs. |
|
|
4. LCD screen
The liquid crystal display screen shows menus and setting values for the operation of your projector.
5. POWER button
Press this button to turn on or off (standby) he power to your projector. Press this for more than three seconds.
When turning on the power to the projector, first set the main power switch to the main unit and the LPSU to ON, thereby setting the projector in a standby state. (See page 19)
6. POWER indicator
| Green lighting | When power is on. |
|
|
|
| Green blinking | When the douser is closed. |
|
|
|
| Orange lighting | When the power is off (in standby state). |
|
|
|
| Orange blinking | When the cooling fan(s) is running immediately after |
|
|
|
7. STATUS indicator |
| |
|
|
|
| Off | When the projector is operating normally. |
|
|
|
| Red blinking | When an error has occurred. |
|
| An error code is displayed on the LCD screen. |
|
|
|
8. CTL (MACRO) button
Press the CTL (MACRO) button together with MACRO SELECT 1 to 8 buttons.
MACRO SELECT<1> to <8> button does not work individually.
10