Manuals / Brands / Home Audio / Home Theater System / NEC / Home Audio / Home Theater System

NEC NC2500S 4-1-2.Operating menus, 4. Using Menus, 1Press the MENU button on the control panel of your projector

1 64

Download 64 pages, 2.53 Mb

4. Using Menus

When not displaying menus, the following screen is normally displayed.

When in standby

When the projector is in a standby state (the main power switch in on), the following is displayed.

When power is turned on

When the power is turned on, the following is displayed.

←Displays the hours of lamp bulb use.

←Displays the lamp output (%).

←Displays the selected title.

←Displays the selected port.

When the power is turned off

The amount of time remaining for cooling is displayed as shown below, when the power to the projector head is turned off.

4-1-2. Operating menus

Preparation: Turn your projector on. (See page 19)

1Press the MENU button on the control panel of your projector .

The menu is displayed in the LCD screen.

2Press the [MENU CTL] LEFT/RIGHT buttons to display “Information.”

At each press of the [MENU CTL] LEFT/RIGHT buttons, the display will cycle as “Title Select” ←→ “Configuration” ←→ “(Title Setup)” ←→ “Information.”

Contents

DLP Cinema® Projector User’s Manual Important Information Important Information Page Page Page Page Page Table of Contents Table of Contents 1.What’s in the Box? and the Names of the Projector Parts 2.Installation and Connection 3.Projection of Images (Basic Operation) What’s in the Box? and the Names of the Projector Parts 1-1.Features 1.What’s in the Box? and the Names of the Projector Parts 1-2.What’s in the Box Page 1-3.Names of the Projector Parts 1-3-1.Front of the projector 1-3-2.Rear of the projector 1-3-3.Lamp power supply unit (LPSU) 1-3-4.Connection terminals 1-3-5.Control panel Page 1-4.Names on the Remote Control Page Page Installation and Connection 2-1.Steps for setting up and connecting 2-2.Connecting the image input terminals 2-3.Connecting the various control terminal Projection of Images (Basic Operation) 3-1.Steps of projecting images 3-2.Turning your projector on Page 3-3.Selecting the title of input signal 3-4.Adjusting the position and the size of projected screen 3-4-1.Displaying the test pattern 3-4-2.Adjusting the position of the projected screen (Lens shift) 3-4-3.Fine adjustment of the size of the projected screen (Zoom) 3-4-4.Focusing the projected screen (Focus) 3-4-5.Adjusting the brightness of the projected screen (Lamp output) 3-5.Turning your projector off Using Menus 4-1.Basic operation with adjustment menus 4-1-1.Screen display 4-1-2.Operating menus 3Press the [MENU CTL] DOWN button 4Press the [MENU CTL] LEFT/RIGHT button to select the submenu “Version.” 5Press the [MENU CTL] DOWN button 6Press the [MENU CTL] DOWN button 7Press the [MENU CTL] LEFT/RIGHT button to select the submenu “Data.” 4-1-3.How to enter alphanumeric characters 4-2.Table of adjustment menus 4-3.Title Select 4-3-1.Title select (Title Memory) 4-3-2.Test Pattern 4-4.Configuration 4-4-1.Lamp Setup 4-5.Title Setup 4-6.Information 4-6-1.Lamp 4-6-2.Macro Key 4-6-3.Usage 4-6-4.Error Code 4-6-5.Version 4-6-6.IP Address 4-6-7.MMS Status Maintenance of Your Projector 5-1.Cleaning the Cabinet 5-2.Cleaning the Lens Appendix 6-1.Troubleshooting 6-1-1.Problems and where to check 6-2.Indicator display list 6-2-1.POWER indicator 6-2-2.STATUS indicator 6-2-3.MMS STATUS indicator 6-2-4.Rear STATUS indicator 6-3.Error code list Page 6-4.Operation using an HTTP browser 6-4-1.Overview 6-4-2.Preparation before use 6-4-3.Handling of the address for operation via a browser 6-4-4.Structure of the HTTP server 6-5.Outline Drawing 6-5-1.Projector head outline drawing 6-5-2.Lamp power supply unit outline drawing 6-6.Specifications Caracteristiques techniques Technische Daten 6-7.Pin Assignment and Functions of Terminal 6-7-1.PC CONTROL connector (D-Sub9 pin) 6-7-2.Remote control input connector (REMOTE IN) (Stereo mini) 6-7-3.LAN port (LAN-A, LAN-B) (RJ-45) 6-7-4.External control connector (GP I/O) (D-Sub37 pin) Page 6-7-5. SDI-A, SDI-B (HD-SDIinput connector) (BNC) 6-7-6. DVI-A, DVI-B(DVI digital Input connector) (DVI-D24 pin) 6-8.Related products list Page 7N8P6673