NEC NC2500S 3Press the [MENU CTL] DOWN button, 5Press the [MENU CTL] DOWN button, 6Press the [MENU CTL] DOWN button, 8Press the [MENU CTL] UP button several times

4. Using Menus

3Press the [MENU CTL] DOWN button.

The submenu “Lamp” of “Information” is displayed.

The menu item can be selected by pressing the ENTER button instead of the SELECT DOWN button To return to the previous state, press the [MENU CTL] UP button, or the CANCEL button.

4Press the [MENU CTL] LEFT/RIGHT button to select the submenu “Version.”

At each press of the [MENU CTL] LEFT/RIGHT button, the display will cycle as “Lamp” ←→ “Macro Key” ←→ “Usage” ←→ “Error Code” ←→ “Version” ←→ “IP Address” ←→ “MMS Status.”

5Press the [MENU CTL] DOWN button.

The submenu “System” another rank lower than “Version” is displayed.

6Press the [MENU CTL] DOWN button.

The submenu “BIOS” another rank lower than “System” is displayed.

7Press the [MENU CTL] LEFT/RIGHT button to select the submenu “Data.”

At each press of the [MENU CTL] LEFT/RIGHT button, the display will cycle as “BIOS” ←→ “Firmware” ←→ “Data” ←→ “Serial No.,” and each version information is displayed.

8Press the [MENU CTL] UP button several times.

At each press of the [MENU CTL] UP button, the display will return to a menu one level above.

27