Manuals / Brands / Home Audio / Home Theater System / NEC / Home Audio / Home Theater System

NEC NC2500S 3-5.Turning your projector off, 3Turn the main power switch on the lamp power supply unit to off

1 64

Download 64 pages, 2.53 Mb

3. Projection of Images (Basic Operation)

3-5. Turning your projector off

1Press the POWER button on the projector control panel for three seconds or longer.

The power to the projector is turned off. The POWER indicator and rear STATUS indicator will blink in orange (cooling state).

The fan will continue to rotate while cooling, and the amount of time remaining for cooling is displayed on the LCD screen. The cooling-off time is 5 minutes.

When cooling has ended, the POWER indicator and the rear STATUS indicator light in orange (Standby).

•When controlling with the remote control, press the POWER OFF button for three seconds or longer.

2When the projector has entered the standby state, turn the main power switch on the projector head to off.

The projector POWER indicator will extinguish and the main power will turn off.

3Turn the main power switch on the lamp power supply unit to off.

The fan will continue to rotate for a short amount of time (approximately 5 seconds) immediately after turning off the power.

OFF

4Turn off the AC power to the projector head and to the lamp power unit.

NOTE • In the following instances, do not turn off the main power switch or disconnect the AC power. Doing so can damage the projector.

•While projecting images

•While the fan is running after the power is turned off (The cooling-off time is 5 minutes)

24

Contents

DLP Cinema® Projector User’s Manual Important Information Important Information Page Page Page Page Page Table of Contents Table of Contents 1.What’s in the Box? and the Names of the Projector Parts 2.Installation and Connection 3.Projection of Images (Basic Operation) What’s in the Box? and the Names of the Projector Parts 1-1.Features 1.What’s in the Box? and the Names of the Projector Parts 1-2.What’s in the Box Page 1-3.Names of the Projector Parts 1-3-1.Front of the projector 1-3-2.Rear of the projector 1-3-3.Lamp power supply unit (LPSU) 1-3-4.Connection terminals 1-3-5.Control panel Page 1-4.Names on the Remote Control Page Page Installation and Connection 2-1.Steps for setting up and connecting 2-2.Connecting the image input terminals 2-3.Connecting the various control terminal Projection of Images (Basic Operation) 3-1.Steps of projecting images 3-2.Turning your projector on Page 3-3.Selecting the title of input signal 3-4.Adjusting the position and the size of projected screen 3-4-1.Displaying the test pattern 3-4-2.Adjusting the position of the projected screen (Lens shift) 3-4-3.Fine adjustment of the size of the projected screen (Zoom) 3-4-4.Focusing the projected screen (Focus) 3-4-5.Adjusting the brightness of the projected screen (Lamp output) 3-5.Turning your projector off Using Menus 4-1.Basic operation with adjustment menus 4-1-1.Screen display 4-1-2.Operating menus 3Press the [MENU CTL] DOWN button 4Press the [MENU CTL] LEFT/RIGHT button to select the submenu “Version.” 5Press the [MENU CTL] DOWN button 6Press the [MENU CTL] DOWN button 7Press the [MENU CTL] LEFT/RIGHT button to select the submenu “Data.” 4-1-3.How to enter alphanumeric characters 4-2.Table of adjustment menus 4-3.Title Select 4-3-1.Title select (Title Memory) 4-3-2.Test Pattern 4-4.Configuration 4-4-1.Lamp Setup 4-5.Title Setup 4-6.Information 4-6-1.Lamp 4-6-2.Macro Key 4-6-3.Usage 4-6-4.Error Code 4-6-5.Version 4-6-6.IP Address 4-6-7.MMS Status Maintenance of Your Projector 5-1.Cleaning the Cabinet 5-2.Cleaning the Lens Appendix 6-1.Troubleshooting 6-1-1.Problems and where to check 6-2.Indicator display list 6-2-1.POWER indicator 6-2-2.STATUS indicator 6-2-3.MMS STATUS indicator 6-2-4.Rear STATUS indicator 6-3.Error code list Page 6-4.Operation using an HTTP browser 6-4-1.Overview 6-4-2.Preparation before use 6-4-3.Handling of the address for operation via a browser 6-4-4.Structure of the HTTP server 6-5.Outline Drawing 6-5-1.Projector head outline drawing 6-5-2.Lamp power supply unit outline drawing 6-6.Specifications Caracteristiques techniques Technische Daten 6-7.Pin Assignment and Functions of Terminal 6-7-1.PC CONTROL connector (D-Sub9 pin) 6-7-2.Remote control input connector (REMOTE IN) (Stereo mini) 6-7-3.LAN port (LAN-A, LAN-B) (RJ-45) 6-7-4.External control connector (GP I/O) (D-Sub37 pin) Page 6-7-5. SDI-A, SDI-B (HD-SDIinput connector) (BNC) 6-7-6. DVI-A, DVI-B(DVI digital Input connector) (DVI-D24 pin) 6-8.Related products list Page 7N8P6673