NEC NDA-30007-003 manual AOKC COMMAND Assignment of OAI Key Codes, Scheduler

MAT Assignments Conference Room Scheduler Installation Guide

AOKC COMMAND: (Assignment of OAI Key Codes)

This command is used to associate the MSF facility and its Op-Code that was configured in the APM for Conference Room Scheduler to one of the 14 OAI Key Codes in the MAT.

1.Select an unused OAI Key Code, from 1 to 14. To determine what Key Codes are available for assignment, use the LOKC command to list the AOKC Key Codes that are already assigned.

2.Enter MSF as the facility to be assigned to the selected Key Code, using the val- ues on the screen.

3.Enter the same Op-Code that was configured for Conference Room Scheduler in the APM. If necessary, retrieve it using the Provider command on the APM Configuration Entry screen.

AKYD COMMAND: (Assignment of Dterm Function Key)

This command is used to assign key data on the Dterms that are to be used to access Conference Room Scheduler. MAT Function Key Indexes #34 to #47 have been designated for use in the OAI system and correspond to the 14 OAI Key Codes as illustrated on the previous page. The AKYD command is used to assign a Dterm function key to the specific MAT Function Key Index that, in turn, corresponds to

the previously assigned OAI Key Code. This command must be used to assign the function key on each Dterm that is to be set up with access to Conference Room

Scheduler.

1.Enter the same tenant number that is configured for Conference Room Schedul- er in the APM Application Configuration option (page 6).

2.Enter the station number of the Dterm on which the function key is being as- signed.

Page 14 NDA-30007 Revision 3.0