NEC NDA-30007-003 manual Application Configuration, Application Characteristics Both Components

Conference Room Scheduler Installation Guide Application Configuration

Chapter 2 Application Configuration

Conference Room Scheduler is configured into the APM system using the Add function of the Application Configuration option on the APM System Administration menu:

1.Enter the APM option from the APM Platform Management Menu.

2.Enter the System Administrator password at the APM password screen.

3.Enter the Application Configuration option from the System Administration menu.

This section contains the information that should be entered to the configuration file for Conference Room Scheduler. The following components must be configured:

• Conf_Room_Sch	– The component application that maintains the real-
	time database and interacts with the user at the
	Dterm.

•Conf_Room_Sch_Rpt – The component application that displays or prints

the real-time database.

For specific instructions on what these parameters mean and how to make these entries, use the APM Operations Manual.

Step 1 – Application Characteristics (Both Components)

In the APM Application Configuration option, make the entries shown below for the components:

Parameter	Description	Conf_Room_Sch	Conf_Room_Sch_Rpt
OAI Application	Indicates whether or not (Yes
	or No) this component
	communicates with the	Y	N
	NEAX2400 using OAI
	processes.
CRT Application	Indicates whether or not (Yes
	or No) this component requires
	a terminal screen that is of the	N	Y
	same type as the one used by
	the APM.
Communication Queue	Indicates whether or not (Yes
	or No) this non-OAI
	application needs an IPC queue	N	N
	to communicate with other
	processes.

NDA-30007 Revision 3.0 Page 3