NEC NDA-30007-003 manual Facilities ConfRoomSch only

Conference Room Scheduler Installation Guide Application Configuration

Step 3 – Facilities (Conf_Room_Sch only)

According to instructions in the APM Operations Manual, designate the following NEAX2400 facilities for the Conf_Room_Sch component using the Facilities command on the APM Configuration Entry screen:

MRFI	Mode Release Facility (I)
MRFR	Mode Release Facility (R)
MSF	OAI Mode Set Facility
NTF	Number Transfer Facility
TCFD	Terminal Control Facility (D)

Note: The same MSF identification number (i.e., from 128 to 192) that is selected in the

APM during Step 3 must be assigned to Conference Room Scheduler at the NEAX

MAT. For more information, see Chapter 4 .

Step 4 – Secondary OAI Configuration Parameters (Conf_Room_Sch only)

Using the OAI-Confcommand on the APM Configuration Entry screen, make the entry shown for each of the following parameters required by Conf_Room_Sch. Use the instructions provided for this option in the APM Operations Manual:

Parameter	Entry	Definition
Database Name #1	/oai/db/cur/crminfofil	Indicates the path name of the database
		containing the conference room
		information. This name must be the
		first listed database. The database
		filename (i.e., crminfofil), listed here
		with its path, should be used as the
		name of the corresponding Application
		Definition File (Refer to Chapter 3.)
Database Name #2	/oai/db/cur/crmidfile	Indicates the path name of the database
		containing the employee identification
		data. This name must be the second
		listed database. The database filename
		(i.e., crmidfile), listed here with its
		path, should be used as the name of the
		corresponding Application Definition
		File (Refer to Chapter 3.)
Timeout Value #1	90	Designates the number of seconds
		Conf_Room_Sch will wait for user
		input before it will release the Dterm.
Tenant Number	0	Specifies the number of the tenant that
		Conf_Room_Sch serves.

NDA-30007 Revision 3.0 Page 5