Answering System Features
Voice guidance
During remote operation, the unit’s voice guidance will prompt you to press {1} to perform a specific operation, or press {2} to listen to more available operations. Operations are presented by voice guidance in the following order:
–Play back all messages
–Play back new messages
–Record a message
–Erase all messages
–Record your greeting message
Note:
L If you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit will announce, “Thank you for your call” then disconnect your call.
L If less than 3 minutes of recording time is available, the unit will announce the remaining recording time after the last message is played back.
L If the unit announces “Memory full”, erase unnecessary messages.
Remote commands
You can press dial keys to access certain answering system functions without waiting for the voice guidance to prompt you.
Key | Remote command |
{1} | Repeat message (during |
| playback)*1 |
{2} | Skip message (during |
| playback) |
|
|
{3} | Change the playback speed |
| to slow/normal. |
{4} | Play new messages |
|
|
{5} | Play all messages |
|
|
{7} | Record a greeting message |
|
|
{9} | Stop (recording, playback)*2 |
{0} | Turn answering system off |
|
|
{*}{4} | Erase this message (during |
| playback) |
|
|
{*}{5} | Erase all messages |
|
|
*1 If pushed within the first 5 seconds of a message, the previous message will be played.
*2 To resume operation, enter a remote command within 15 seconds, or the voice guidance will start.
Turning on the answering system remotely
If the answering system is off, you can turn it on remotely.
1 Dial your phone number.
2 Let the phone ring 15 times.
L The unit will answer your call with the greeting message.
L You can hang up, or if you call from a touch tone phone, you can enter your remote code and begin remote operation (page 52).
For assistance, please visit http://www.panasonic.com/consumersupport | 53 |
