Answering System Features
4Press {OFF}.
L To turn the Answering System off, press {0} in step 3. “Answer off” is heard.
Screening your calls
While a caller is leaving a message, you can listen to the call through the base unit’s speaker. To adjust the speaker volume, press VOLUME {>} or VOLUME {<} repeatedly.
You can answer the call by pressing {C} or {s}.
To turn off the call screening feature
When the base unit is not in use, press {GREETING CHECK}, then press VOLUME {<} repeatedly until “0” is displayed.
OR
While screening, press VOLUME {<} repeatedly until “0” is displayed.
Note:
L If the incoming call monitoring feature is turned off, it will remain off when the next call is monitored.
L If you adjust the speaker volume while playing back messages or using the speakerphone, the speaker volume for monitoring will be turned on again. To turn the speaker volume off, see “To turn off the call screening feature” of above step.
Listening to messages
When new messages have been recorded:
–The NEW MESSAGE indicator on the base unit will flash.
–The Ringer/Message Alert indicator on the handset will flash slowly if the message alert feature is turned on (page 55).
The base unit display will show the number of messages (old and new) recorded by the answering system.
Example: The total number of recorded messages is 10.
Listening to messages using the base unit
NEW MESSAGE Indicator
{MESSAGE/SLOW TALK}
{STOP}
{ERASE}
{REPEAT} {SKIP}
Press {MESSAGE/SLOW TALK}.
L The unit will announce the number of new messages and will play back the new messages.
L When you have no new messages, the unit will announce “No new messages. All message playback”, and will play back all messages.
48For assistance, please visit http://www.panasonic.com/consumersupport
