Answering System Features
Answering system commands
You can also operate the answering system by pressing dial keys.
To use the following commands, press {MENU}, then select “Message play”.
Key | Command |
{1} or | Repeat message (during |
{Repeat} | playback)*1 |
{2} or | Skip message (during |
{Skip} | playback) |
{3} | Change the playback |
| speed to slow/normal |
{4} | Play new messages |
|
|
{5} | Play all messages |
|
|
{8} | Turn answering system on |
|
|
{9} | Stop playback*2 |
{0} | Turn answering system off |
|
|
{*}{4} | Erase this message |
| (during playback) |
|
|
{*}{5} | Erase all messages |
|
|
*1 If pressed within the first 5 seconds of a message, the previous message will be played.
*2 To resume operation, press a command key within 15 seconds, or the voice guidance will start.
Calling back (Caller ID subscribers only)
If Caller ID information was received for the call, you can call the caller back while listening to a message.
To call back the displayed number:
1 During playback, press {MENU}.
2 Press {Call}, {C} or {s}.
L The unit stops playback and dials the phone number.
L If you need to edit the phone number to call back, see page 30.
Recording a memo message
NEW MESSAGE Indicator
{STOP}
{MEMO}
MIC
You can record a voice memo message of up to 3 minutes in memory.
1Press {MEMO}.
2After the long beep, talk clearly, about 20 cm (8 inches) away from the MIC.
L The base unit display shows the elapsed recording time.
L If the elapsed recording time exceeds
99 seconds, the counter continues from 00 to indicate 100 seconds.
3When finished, press {MEMO} or
{STOP}.
L The NEW MESSAGE indicator flashes.
L If you record for over 3 minutes in step 2, the unit will stop recording.
L If “
” is displayed, 6 beeps sound and “Your message was not recorded. Record your message again.” is announced, start again from step 1.
For assistance, please visit http://www.panasonic.com/consumersupport | 51 |
