Making/Answering Calls
The handset will not make announcements, when:
L the Name Announcement is turned off
L the Answering System is in use
L the handset has lost communication with the base unit
L the base unit is announcing
L the base unit is making an outside call.
To put a call on hold
1 Press {HOLD/INTERCOM} during a conversation.
L “Line on hold.” is displayed.
2 Press {HOLD/INTERCOM} again.
L “Hold” is displayed.
L You can search the caller list or phonebook while a call is on hold. To exit the list, press {OFF}. The call will remain on hold.
To return to the call, press {C} or {s}.
Note:
L The base unit user can also take the call by pressing
L If another phone is connected on the same line (page 8), you can also take the call by lifting its handset.
L If a call is kept on hold for 6 minutes, an alarm tone will start to sound and the Ringer/Message Alert indicator will start to flash rapidly. After 4 additional minutes on hold, the call will be disconnected.
Using the base unit
{HOLD/CONF}
{REDIAL}
{SP-PHONE} VOLUME and Indicator
{<}, {>} MIC
1 Press
L The
2 Dial a phone number.
L The base unit announces each button you press, including {1} to {0}, {*} (“Star”), {#} (“Pound”), and {FLASH/ CALL WAIT} (“Flash”).
3 When the other party answers, talk into the MIC (microphone).
4 To hang up, press
Note:
L To switch to the handset while using the base unit speakerphone:
–If the handset is off the base unit or charger, press {C} or {s} on the handset, then press
–If the handset is on the base unit , just lift up the handset.
L If the Base Unit Talking Keypad is turned off (page 44), the base unit will not announce the entered number.
18For assistance, please visit http://www.panasonic.com/consumersupport
