Press {Select} at “Ringer volume”.

Programmable Settings

Ringer settings

Handset ringer volume

4 levels (high/medium/low/off) are available.

1 Press {MENU}.

2 Scroll to “Ringer setting” by pressing {V} or {^}, then press {Select}.

3

4 Select the desired volume level by pressing {V} or {^}.

L The volume will change and ring.

L The number of steps indicates the volume level.

L To turn the ringer off, press {V} repeatedly until “Off ?” is displayed.

5 Press {Save}.

Note:

L When the ringer volume is set to off, the handset will not ring for outside calls. The handset will ring at the low level for intercom calls.

L When the ringer volume is set to off, the handset will not announce caller names (page 27).

L If the handset ringer is turned off, “Ringer off” will be displayed while not in use. If the handset is off the base unit or charger when there are missed calls (page 28) or new messages (page 49), “Ringer off” is not displayed.

L You can adjust the ringer volume while an outside call is ringing. Press {V} or {^} while the handset is ringing.

Temporary ringer off

While the handset is ringing for an outside call, you can turn the ringer off temporarily by pressing {OFF}. The handset will ring again as normal the next time a call is

received.

Base unit ringer volume

To set the ringer volume to high (preset), medium, or low, press VOLUME {<} or

{>}.

L To increase volume, press VOLUME {>}. To decrease volume, press VOLUME {<}.

L To stop ringing, press {STOP}.

To turn the ringer off, press and hold VOLUME {<} until 2 beeps sound.

L O” is displayed.

To turn the ringer on, press VOLUME {>} or {<}.

L The base unit will ring at low level.

L You can adjust the ringer volume while an outside call is ringing. Press VOLUME {<} or {>} while the base unit is ringing.

To turn the ringer off, press and hold VOLUME {<} for 2 beeps sound. “O” is displayed.

Handset ringer tone

You can change the ringer tone heard when an outside call is received. There are 3 tones and 4 melodies.

Important:

L You cannot change the ringer tone for intercom calls.

L If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your telephone company with 2 or 3 consecutive rings, select a bell ringer pattern (Tone 1 to 3). If you select a melody pattern, you will not be able to distinguish lines by their ringers.

L If you select one of the melody ringer patterns, the ringer will continue to sound for several seconds if:

the caller hangs up before you answer the call, or

For assistance, please visit http://www.panasonic.com/consumersupport

39

Page 39
Image 39
Panasonic KX-TG2388 Ringer settings, Handset ringer volume, Base unit ringer volume, Handset ringer tone, Is displayed