Caller ID Service
Calling Back using the handset
1 Press {Rcvd calls}, {V}, or {^}.
2 Scroll to the desired caller by pressing {V} or {^}.
3 Press {C}, or {s}.
L The phone number is dialed.
Note:
L In some cases, you may have to edit the number before dialing.
(For example You may have to delete “1” and the area code.)
L If a phone number is not displayed in the caller information, you cannot call that caller back from the caller list.
Editing a caller’s phone number before calling back using the handset
You can edit a phone number in the caller list by removing its area code and/or the long distance code “1”.
1
2 Press {V} or {^} repeatedly to display the desired item.
3
4 Press {Edit} repeatedly until the phone number is shown in the desired format. Each time you press {Edit}, the phone number will be rearranged into one of 3 patterns.
1Local phone number Example:
2Area code – Local phone number
Example: 555-321-5555
31 – Area code – Local phone number
Example:
5 Press {C} or {s} to call back.
Note:
L If Caller ID Number Auto Edit is turned on (factory preset is on), phone numbers with the same area code as the number you edited will now be updated in the caller list and each time you receive a call.
L You can press {OFF} immediately after pressing {C} or {s} if you wish to activate the Auto Edit feature without actually dialing the number you just edited.
Caller ID number auto edit feature using the handset
Once you call back an edited number (see “Editing a caller’s phone number before calling back using the handset”), the unit can automatically edit other incoming phone numbers each time you receive a call.
For example, you can use this feature to set the unit to ignore the area code of callers in your area code, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an item in the caller list (see “Editing a caller’s phone number before calling back using the handset”), then call that number. After that, calls from that caller’s area code will be edited automatically.
This feature can be turned on or off (page 42). The default setting is ON.
Note:
L The handset can remember up to 4 area codes to be edited. Phone numbers from the 4 most recently edited area codes will be automatically edited.
L This feature will not be activated until edited numbers are called back.
L If you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature
30For assistance, please visit http://www.panasonic.com/consumersupport
