Answering System Features
Note:
L The display shows the message number during playback.
L During playback, the unit will announce the day and time that each message was recorded. (Voice time/day stamp)
L At the end of the last message, the unit announces “End of final message”.
L If a call is received during playback, the unit rings and playback stops. To answer the call, press
To adjust the speaker volume
9 levels (high to off) are available. Press VOLUME {>} or VOLUME {<} repeatedly while using the answering system.
To slow down the playback speed (Slow Talk Message Playback)
Press {MESSAGE/SLOW TALK} during playback.
L To return to normal speed, press {MESSAGE/SLOW TALK} on the base unit.
L Each time you press the button during playback, the speed will change to slow/ normal.
L Playback speed will return to normal after you finish listening to messages.
Repeating a message
Press {REPEAT} while listening to the message.
L If pressed within the first 5 seconds of a message, the previous message will be played.
Skipping a message
Press {SKIP} to play the next message.
Stopping message playback
Press {STOP}.
L To resume playback, press {MESSAGE/ SLOW TALK}.
L If you do not press any button for 60 seconds or if you press {STOP} again, playback mode will be canceled.
Erasing a specific message
Press {ERASE} while listening to the message you want to erase.
L The unit beeps, then plays back the next message.
L To exit playback mode, press [STOP] twice.
Erasing all messages
1 Press {ERASE} while the base unit is not being used.
L The unit will announce “To erase all messages, press ERASE again.”
2 Within 10 seconds, press {ERASE} again.
L The unit will announce “No messages”.
Note:
L Caller information for the erased messages will remain in the caller list.
Listening to messages using the handset (Remote Operation)
{OFF}
{MENU}
For assistance, please visit http://www.panasonic.com/consumersupport | 49 |
