Press {Select} at “Set dial mode”.
Press {MENU}.

Preparation

L The display changes to the selected language.

L You can also select a language by pressing {V} or {^}.

5 Press {Save} or {Salvar}, then press {OFF}.

Note:

L If you select a language you cannot read, press {MENU} {0} {8} {1} {Save} to change the display language to English.

Setting the dialing mode

If you cannot make calls, change this setting depending on your telephone line service. The default setting is “Tone”. “Tone”: For tone dial service.

Pulse”: For rotary pulse dial service.

1

2 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.

3 Scroll to “Set tel lineby pressing {V} or {^}, then press {Select}.

4

5 Press {V} or {^} to select the desired setting.

6 Press {Save}, then press {OFF}.

Setting the date and time

1 Press {MENU}.

2 Scroll to “Date and time” by pressing {V} or {^}, then press {Select}.

3 1Enter the current month, day, and year by selecting 2 digits for each.

Example: June 15, 2005

Press {0}{6} {1}{5} {0}{5}.

Date:06.15.2005

Time:12:00 AM

KAM/PM SaveL

2Enter the current hour and minute

(12-hour clock format) by selecting 2 digits for each.

Example: 9:30 PM

Press {0}{9} {3}{0}.

Date:06.15.2005

Time:09:30 AM

KAM/PM SaveL

4 Select “AM” or “PM” by pressing {AM/ PM}.

5 Press {Save}.

L When the date and time are set, E disappears from the base unit display.

L If the handset beeps 3 times, the date and time were not set correctly. Enter the correct digits.

6 Press {OFF}.

The date and time may be incorrect after a power failure. When Eflashes on the base unit display, set the date and time again.

To confirm the date and time

Repeat steps 1 and 2.

L The current date and time are displayed. When finished, press {OFF}.

For Caller ID service users (page 27)

L When a call is received, Caller ID information adjust the date and time if the time is incorrect.

L Caller ID information will automatically adjust the date and time for daylight saving time.

L If the date and time has not previously been set, Caller ID information will not adjust the date and time.

For assistance, please visit http://www.panasonic.com/consumersupport

15

Page 15
Image 15
Panasonic KX-TG2388 Setting the dialing mode, Setting the date and time, Date06.15.2005 Time1200 AM KAM/PM SaveL