PAN/TILT setting menu, Zone Scale setting menu | Panasonic WV-CW864

3. To register a new zone

3-1 For PAN/TILT, move the cursor to PUSH SET and press the CAM (SET) key.

3-2 Adjust the pan and tilt position so that the desired position comes into the zone frame by using the joystick.

Note: Zone setting is not available while the zone frame is not shown, for example, when the camera is tilted downward by more than 45 °.

3-3 For ZOOM/FOCUS, move the cursor to PUSH SET , and press the CAM (SET) key.

PAN/TILT setting menu

** ZONE NUMBER 1*/8 **

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

U TILT D/L PAN R

ZONE SCALE	••••••••
SET DEL	–	+
RET

ZOOM/FOCUS setting menu

** ZONE NUMBER 1*/8 **

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

U ZOOM D/L FOCUS R

3-4 Adjust zoom and focus, and press the CAM (SET) key.

Zoom can be adjusted within the range of 1 to 10 magnifica- tions.

3-5 Move the cursor to ZONE SCALE, and move the joystick to the right or left to adjust the zone frame. Press the CAM (SET) key after the adjustment.

Moving the joystick in the L direction decreases the zone frame, and moving it in the H direction increases it. However, the aspect ratio is fixed at 3 to 4.

The privacy zone setting has been completed.

The menu returns to the ZONE NUMBER setting menu. If DEL is selected, zone setting is released and the ZONE NUMBER setting menu appears.

Notes:

•To complete new settings and repeat other settings, move the cursor to SET and press the CAM (SET) key. The ZONE NUM- BER setting menu returns.

•To cancel new settings and return to the SPECIAL 1 menu, move the cursor to DEL and press the CAM (SET) key. New settings are not registered.

•To complete new settings and return to the SPECIAL 1 menu, move the cursor to RET and press the CAM (SET) key.

ZONE SCALE	••••••••
SET DEL	–	+
RET

ZONE SCALE setting menu

** ZONE NUMBER 1*/8 **

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

ZONE SCALE	••••••••
SET DEL	–	+
RET

27

Image 26

Panasonic WV-CW864 operating instructions PAN/TILT setting menu, Zone Scale setting menu

Contents

Operating Instructions Contents Important Safety Instructions English Features Preface Preset Data Uploading or Downloading PrecautionsCamera Cleaning Do not attempt to disassemble the cam- era If Over Heat appears on the monitor screen Do not install the camera in places sub- ject to vibrationsNever aim the camera at the sun Consumables Construction Setup Setup Menu SET Key CAM SET Key Down Switch Focus Switch Zoom SwitchUp Switch Right Switch Left Switch Close CAM Setup F4 key Key for 2 sec Key for 2 seco Auto Mode Auto Mode Setup Menu DescriptionPresetting Home Position Home Position Local/Remote LOCAL/REMOTE Auto Pan Key Auto PAN KEYDigital Flip Digital Flip Special 1 Menu Camera Electronic Sensitivity Enhancement Sens UP Shutter Speed ShutterGain Control AGC Synchronization Sync RS485 communication Menu Display Setting ProceduresSetup Menu Display Submenu Display Position Setting Position SET PresettingPreset Menu Display To Set Panning/Tilting Positions To Set the Lens Zoom and Focus Positions ZOOM/FOCUS setting menuPan Offset To Copy a Preset ID from Another Position Preset Identification Setting Preset IDTo Enter a New Preset ID To Change an Entered Preset ID To Return to the Preset Setting Menu Light Control Setting ALC/MANUALTo Set a Display Position for a Preset ID Manual setting menu To Return to the Preset Number Set Menu Scene File Setting Scene FilePreset Speed Setting Preset Speed To Return to the Setup Menu Self Return Setting Self Return Deleting Preset PositionsHome Position Setting Auto Mode Selection Auto Mode Auto PAN setting menu When the panning, tilting, zooming or focusing in the SEQ Auto Pan Key Setting Digital Flip Setting Digital Flip Privacy Zone Privacy Zone Local/Remote Setting LOCAL/REMOTESpecial 1 Menu Setting Special Zone Scale setting menu Proportional Pan/Tilt PROPO. P/T When on Nesw is selectedArea Title Nesw setting menu Area Title Area Title Direction User setting menu Setting on UserDisplay Position setting menu Area Title Editing Area Title menu Patrol-learn and Patrol Play PatrolTo Quit Editing Patrol Play with a Controller Having the Patrol Key Patrol-learn with a Controller Having the Patrol KeyPatrol-learn with a Controller not Having the Patrol Key Patrol Play with a Controller not Having the Patrol Key CNT-CLS 1, 2 Output Alarm Input/Output Alarm IN/OUTAlarm I/O submenu Password Lock Password Lock Password Verification Cleaning Cleaning New Password Image Hold Image Hold Preset Alarm Preset ALMElectronic Zoom EL-ZOOM Camera setting menu Camera SettingTo Display the Camera Setting Menu Camera Identification Camera ID Backlight compensation menu Turns to white Blinking Electronic Sensitivity Enhancement Sens UP Shutter Speed Setting ShutterGain Control AGC Sync menu Line-lock Sync Mode LLSynchronization Sync White Balance White BAL Auto-Tracing White Balance Mode ATW1/ATW2ATW fine adjustment menu Automatic White Balance Control Mode AWC AWC fine adjustment menu Motion Detector Motion DET Motion detect menu Auto Focus Setting AF Mode Special 2 Menu SPECIAL2 Camera Resetting Camera Reset Black Burst Setting Burst BWTo Restore the Camera Default Position Refresh Changing the Camera Communication Parameters RS485 SetupInitial Camera Communication Parameters Unit Number Unit Number Alarm Data Alarm DataDelay Time Delay Time Sub Address SUB Address Mounting the Camera InstallationPrecautions Ceiling mount Mounting the Bracket PreparationsDisassembling the Camera Waterproof Material X4 Screws Upper Base Setting the Switches RS485 Parameter Setup For Panasonic’s Protocol Unit Number Switch position Unit RS485 Setting Mounting the camera Connections AC Power Supply ConnectionHow to Assemble the Cable with the Accessory Connector RS485 Connection Alarm in ConnectionsAlarm OUT Connections System Connections Power consumption SpecificationsSignal-to-noise ratio Prevention of Blooming and Smear WV-7176E AccessoriesOptional Accessories Appendix Shortcuts N0202-1032 V8QA5996BN Imprimé au Japon Regional Offices