ON: The last displayed still image is shown till the camera finishes moving to a preset position. However, the still image may be distorted with the effect of panning or tilting.
OFF: The current image is being displayed while the camera is moving to a preset position.
■Camera Setting
To Display the Camera Setting Menu
•Move the cursor to CAMERA O, and press the CAM (SET) key. The camera setting menu appears.
●Camera Identification (CAMERA ID)
1.Move the cursor to CAMERA ID, and select ON to display the camera identification by using the joystick.
The factory default setting is OFF.
2.Follow the steps below to edit the camera ID characters:
3.After editing the camera identification characters, follow the steps below to decide the position of the CAMERA ID.
Notes:
•When you want the pointer to move to a specific character in the editing area, select a new character, and press the CAM (SET) key. This function allows you to edit or correct a specif- ic character.
•To enter a blank space into the camera ID, move the cursor to SPACE, and press the CAM (SET) key.
•To erase all characters in the editing area, move the cursor to RESET, and press the CAM (SET) key.
Setup menu
** SET UP MENU **
PRESET 1 MAP 
HOME POSITION OFF
SELF RETURN OFF
AUTO MODE OFF AUTO PAN KEY AUTO PAN DIGITAL FLIP ON LOCAL/REMOTE LOCAL SPECIAL1 
CAMERA 
RS485 SET UP
Camera setting menu
** SET UP **
CAMERA ID | OFF | ||
ALC/MANUAL | ALC | ||
SHUTTER |
| OFF | |
AGC |
| ON(MID) | |
SENS UP |
| X2 AUTO | |
SYNC |
| INT | |
WHITE BAL | ATW1 | ||
MOTION DET | OFF | ||
AF MODE |
| MANUAL S | |
RET | SPECIAL2 | ||
** SET UP ** | |||
CAMERA ID | ON |
| |
ALC/MANUAL | ALC |
| |
SHUTTER |
| OFF | |
AGC |
| ON(MID) | |
SENS UP |
| X2 AUTO | |
SYNC |
| INT | |
WHITE BAL | ATW1 | ||
MOTION DET | OFF | ||
AF MODE |
| MANUAL S | |
RET | SPECIAL2 | ||
Character editing menu
CAMERA ID 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ().,'":;&#!?=
SPACE
POSI RET RESET CAM1............
CAM1
36
