41
8. Move the cursor to FINE by using the joystick.
9. Match the vertical phase for both video output signals as closely
as possible by using the joystick.
Notes:
•When the “|” cursor reaches the “+” end, it jumps back to “–”.
At the same time, COARSE is incremented by one step to
enable a continuous adjustment. The reverse takes place
when the “|” cursor reaches the “–” end.
•When the joystick is kept at the right or left for one second or
more, the “|” cursor moves quickly.
•To reset COARSE and FINE to the preset values, press the F2
button of the WV-CU550B. For the WV-RM70, press the Right
and Left switches simultaneously. COARSE is preset to zero-
crossing of the AC line phase.
•If the AC line phase contains spike noise, etc., the vertical
phase of the video output signal may be disturbed.
●White Balance (WHITE BAL)(1) Auto-Tracing White Balance Mode (ATW1/ATW2)
1. Display SET UP MENU on the monitor screen by referring to page
16.
2. Move the cursor to WHITE BAL and select ATW1 by using the joy-
stick.
The factory default setting is ATW1.
The white balance of the camera is automatically adjusted.
3. For fine adjustment of ATW1/ATW2, press the CAM (SET) key. The
ATW1/ATW2 fine adjustment menu appears on the monitor
screen.
4. Move the cursor to R.
Obtain the optimum red gain by moving the joystick to the right or
left.
5. Move the cursor to B.
Obtain the optimum blue gain by moving the joystick to the right
or left.
6. Move the cursor to RET by using the joystick and press the CAM
(SET) key to return to the SET UP menu.
** SYNC **
V PHASE
COARSE
FINE
RET
4(1--16)
••••••|••
- +
** SYNC **
V PHASE
COARSE
FINE
RET
1(1--16)
•|•••••••
- +
** SET UP **
CAMERA ID
ALC/MANUAL
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
AF MODE
RET SPECIAL2
OFF
ALC
OFF
ON(MID)
X2 AUTO
INT
ATW1
OFF
MANUAL S
Camera setting menu
** ATW1 **
R
B
RET
••••|••••
- +
••••|••••
- +
ATW fine adjustment menu