5
■Camera Cleaning
Even if this function is used, noise may be produced on the monitor screen, or the preset position may
deviate in the course of prolonged use.
In such cases, activate the refresh mode on the special 2 menu. (See page 46.)
To use this camera with the WJ-SX550B Matrix Switcher, set the auto cleaning function activated on the
Matrix Switcher side, then clean WV-CW864 one time a day.
■Preset Data Uploading or Downloading
To download the preset data from the camera to the controller or upload the downloaded data to the
camera, set the following functions to OFF.
Downloading or uploading the data may not work normally if these functions are set to ON.
•Alarm (See page 32.)
•Preset alarm (See page 35.)
•Cleaning (See page 34.)
•Motion detection (See page 43.)
•Auto mode (See page 23.)
•Self return (See page 22.)
Aim the camera at a motionless object such as a wall, if possible, to download or upload the preset data.
Note: Take notice of the following when uploading the downloaded data to the camera.
•Preset positions may vary. If a preset position has deviated, delete the preset position and set
the correct preset position newly.
•Uploading of WV-CW864 preset data to other models (e.g. WV-CS850A series) may cause an
error and failure of the uploading process.
1. Do not attempt to disassemble the cam-
era.
To prevent electric shock, do not remove
screws or covers.
There are no user-serviceable parts inside.
Ask a qualified service personnel for servic-
ing.
2. Handle the camera with care.
Do not misuse the camera. Avoid striking,
shaking, etc. The camera could be dam-
aged by improper handling or storage.
3. Consult an expert on the load bearing
capacity of the installation surface and
structure. If the surface is not strong
enough, the camera may fall down. Refer
to the product specifications for weights.
4. Do not install the camera in places where
it will be exposed to corrosive gasses,
e.g., in chemical plants, seaside, at swim-
ming pools or the like. Otherwise corro-
sion of the bracket may cause the camera
to fall down.
5. Use the fall-prevention wires to reduce
the risk of the camera falling down.
Do not detach the fall-prevention wire secur-
ing the camera. Otherwise the camera could
fall down, causing injury to persons and
damage to the camera.
PRECAUTIONS