30
To Quit Editing
•To return to the AREA TITLE menu, move the cursor to RET, and
press the CAM (SET) key.
•To cancel one area title, move the cursor to RESET in the AREA
TITLE menu, and press the CAM (SET) key.
•To return to the SPECIAL 1 menu, move the cursor to RET, and
press the CAM (SET) key.
•To erase all the area titles, move the cursor to RESET in the AREA
TITLE (USER) selection menu, and press the CAM (SET) key.
Notes:
•An area title appears under the camera ID if both are set in
the same position. If the setting is different, they appear in the
area title position.
•In case of sharing a common subject in a scene of other cam-
era number, the nearest area title appears while the camera
direction deviates within 45° from the set position. If two or
more area numbers are set in the same position, the title of
the highest number appears.
● Patrol-learn and Patrol Play (PATROL)
A routine of manual operations can be stored for 30 seconds at the
maximum and reproduced repetitively.
1. Set the following parameters for the patrol-learn starting position.
These parameters are stored when the patrol-learn mode starts.
•PAN/TILT/ZOOM/FOCUS
•IRIS
•SHUTTER
•AGC
•SENS UP
•WHITE BALANCE
•IMAGE HOLD
•AREA TITLE
•DIGITAL FLIP
•PRIVACY ZONE
•CAMERA ID
•PROPO.PT
•PAN LIMIT
•BURST
•CLEANING
After starting the patrol-learn, the following manual operations are
stored.
•PAN/TILT/ZOOM/FOCUS operation
•IRIS operation
•Preset positioning
2. Open the SET UP menu and move the cursor to SPECIAL 1. For
PATROL, select LEARN, PLAY or STOP by moving the joystick to
the right or left.
The factory default setting is STOP.
LEARN: A series of manual operations is stored.
PLAY: Stored operations are reproduced.
STOP: LEARN or PLAY is not activated.
AREA TITLE 1*
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$
SPACE
POSI RET RESET
................
AREA TITLE menu
FLOOR 1
NORTH
Display Position setting menu
** SPECIAL 1 **
PRIVACY ZONE
PROPO.P/T
AREA TITLE
PATROL
ALARM IN/OUT
PASSWORD LOCK
CLEANING
EL-ZOOM
PRESET ALM
IMAGE HOLD OFF
RET
OFF(ENB)
ON
ON(USER)
STOP
OFF
OFF
ON
OFF
Special 1 menu