●Synchronization (SYNC)
1.Display SET UP MENU on the monitor screen by referring to page 16.
2.Move the cursor to SYNC and select LL or INT by using the joy- stick.
The factory default setting is INT.
Important Notices:
1.The priority of SYNC modes is as follows:
1.Multiplexed vertical drive (VD2) (highest priority)
2.
3.Internal sync (INT) (lowest priority)
2.To use internal sync, select INT.
3.Whenever the vertical drive pulse (VD2) is supplied to the cam- era, the camera sync mode is automatically switched to the multi- plexed vertical drive pulse (VD2) regardless of the selected sync mode.
Line-lock Sync Mode (LL)
1.Display SET UP MENU on the monitor screen by referring to page 16.
2.Move the cursor to SYNC and select LL by using the joystick. LL sync mode is not available when the multiplexed vertical drive (VD2) pulse is supplied.
3.After selecting LL, press the CAM (SET) key. The SYNC menu appears on the monitor screen.
4.Supply the video output signal of the camera to be adjusted and the reference video output signal (for example, Camera 1) to a
5.Set the
6.Move the cursor to COARSE by using the joystick.
7.Match the vertical phases for both video output signals as closely as possible by using the joystick. The coarse adjustment can be incremented in steps of 22.5 degrees (16 steps) with the joystick.
1 (1 - - - 16): 0 degrees
2 (1 - - - 16): 22.5 degrees
16 (1 - - - 16): 337.5 degrees
Note: After the 16th step, the adjustment returns to the first step.
Camera setting menu
** SET UP **
CAMERA ID | OFF | ||
ALC/MANUAL | ALC | ||
SHUTTER |
| OFF | |
AGC |
| ON(MID) | |
SENS UP |
| X2 AUTO | |
SYNC |
| INT |
|
WHITE BAL | ATW1 | ||
MOTION DET | OFF | ||
AF MODE |
| MANUAL S | |
RET | SPECIAL2 | ||
Camera setting menu
** SET UP **
CAMERA ID | OFF | ||
ALC/MANUAL | ALC | ||
SHUTTER |
| OFF | |
AGC |
| ON(MID) | |
SENS UP |
| X2 AUTO | |
SYNC |
| LL |
|
WHITE BAL | ATW1 | ||
MOTION DET | OFF | ||
AF MODE |
| MANUAL S | |
RET | SPECIAL2 | ||
SYNC menu
** SYNC **
V PHASE
COARSE
FINE••••••••
- +
RET
** SYNC **
V PHASE
COARSE
FINE••••••••
- +
RET
40
