Panasonic WV-CW864 Local/Remote Setting LOCAL/REMOTE, Special 1 Menu Setting Special

■Local/Remote Setting (LOCAL/REMOTE)

•Move the cursor to LOCAL/REMOTE, and select LOCAL or REMOTE by moving the joystick to the right or left.

The factory default setting is LOCAL.

Note: The REMOTE mode does not work when the WV-RM70, WV-CU360, WV-CU161, WJ-FS616 or WV-CU550 series is connected. Make sure that LOCAL mode is selected in this case.

■Special 1 Menu Setting (SPECIAL 1)

●Privacy Zone (PRIVACY ZONE)

Up to 8 unwanted zones can be masked on the monitor screen.

1.Move the cursor to PRIVACY ZONE and select ON (ENB) or OFF (ENB) by moving the joystick to the right or left. Press the CAM (SET) key to display the ZONE NUMBER setting menu.

The factory default setting is OFF (ENB).

ON (ENB): Preset privacy zones are veiled on the monitor screen.

OFF (ENB): The veiling function does not work.

Note: If ON(DIS) or OFF(DIS) appears for PRIVACY ZONE, the steps from 2 onward are not applicable. Select OFF for PASS- WORD LOCK to take the following steps.

Setup menu

** SET UP MENU **

PRESET 1 MAP

HOME POSITION OFF

SELF RETURN OFF

AUTO MODE OFF

AUTO PAN KEY AUTO PAN DIGITAL FLIP ON LOCAL/REMOTE LOCAL SPECIAL1

CAMERA RS485 SET UP

Special 1 menu

** SPECIAL	1 **
PRIVACY ZONE	OFF(ENB)
PROPO.P/T	ON
AREA TITLE	ON(USER)
PATROL	STOP
ALARM IN/OUT
PASSWORD LOCK	OFF
CLEANING	OFF
EL-ZOOM	ON
PRESET ALM	OFF
IMAGE HOLD	OFF
RET

ZONE NUMBER setting menu

** ZONE NUMBER 1*/8 **

RET

2.Select a zone number by moving the joystick to the right or left, and press the CAM (SET) key.

•A zone number followed by * (asterisk) indicates that the zone has already been registered.

•When a zone number having no * is selected, the picture is zoomed out fully.

•When a registered zone number is selected, the camera moves to the preset position. Note that if you move PAN/TILT, ZOOM/FOCUS or ZONE SCALE in that position, the regis- tered zone number having “*” is cancelled.

•The zone frame appears in the center of the screen if 3 or fewer mask areas exist in that picture and if the zone number is not registered yet.

•The privacy zone may appear on the monitor screen depend- ing on the direction of the camera.

•The privacy zone function will not work at start-up immediate- ly after turning the power on.

ZONE setting menu

** ZONE NUMBER 1*/8 **

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

ZONE SCALE	••••••••
SET DEL	–	+
RET

ZONE setting menu

** ZONE NUMBER 1*/8 **

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

ZONE SCALE	••••••••
SET DEL	–	+
RET

26