Programmable Settings
–another person answers the call using another phone connected on the same line.
1 Press {MENU}.
2 Scroll to “Ringer setting” by pressing {V} or {^}, then press {Select}.
3 Scroll to “Ringer tone”by pressing {V} or {^}, then press {Select}.
4 Select the desired ringer tone by pressing {V} or {^}.
L The handset will ring and the ringer tone will change. If the handset ringer volume has been turned off, the handset will not ring.
L You can also select the ringer tone by pressing {1} to {7}.
5 Press {Save}, then press {OFF}.
Base unit ringer tone
Using the base unit
Make sure the base unit is not being used.
Press VOLUME {<} or {>}, then select the desired ringer tone by pressing {1} to {7}.
{1} to {3} : Bell ringer patterns
{4} to {7} : Melody patterns
LAfter pressing VOLUME {<} or {>}, the base unit will ring using the current ringer tone.
L The base unit will ring and the ringer tone will change.
L To stop ringing, press {STOP}.
Using the handset
1 Press {MENU}.
2 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.
3 Scroll to “Set base unit” by pressing {V} or {^}, then press {Select}.
4
5 Select the desired ringer tone by pressing {V} or {^}.
L The base unit will ring and the ringer tone will change. If the base unit ringer volume has been turned off, the base unit will not ring (page 39).
L You can also select the ringer tone by pressing {1} to {7}.
6 Press {Save}, then press {OFF}.
Handset incoming call tone
During an intercom call (page 32), you can be informed of incoming calls by two tones. If this feature is turned on, incoming call tones will be heard for as long as the line is ringing. If this feature is set to “2”, incoming call tones will be heard only 2 times.
If this feature is turned off, no tones will be heard.
1
2 Scroll to “Ringer setting” by pressing {V} or {^}, then press {Select}.
3 Scroll to “Incoming call.” by pressing {V} or {^}, then press {Select}.
4 Select “On”, “Off” or “2” by pressing {V} or {^}.
5 Press {Save}, then press {OFF}.
Base unit incoming call tone
1 Press {MENU}.
2 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.
40For assistance, please visit http://www.panasonic.com/consumersupport
