R290 User’s Guide
4.Use the SOFT keys to choose a message and press YES to select it. The first three lines of the message are displayed.
5.You can use the <* and #> keys to scroll through the other messages and the SOFT keys to scroll through the message text.
6.Press YES and a copy of the message text is created but without the message parameters. You then add the destination, service centre, validity period and type to the copy and send the completed message to a third party.
To Set the Message Parameter Defaults
1.Press SOFT LEFT, 3 to enter Messages menu.
2.Press 2 to show the Originate menu.
3.Press 6 to display the Defaults Menu. The display will show:
4.Select an option or press NO to return to the Originate Message Menu.
5.Enter values for the default destination address, service centre address, validity period and message type. When each value is entered to your satisfaction, press YES to set it as a default.
To Check on the Status of the Last Message Sent
At the Originate Message Menu, press 7 and the phone will return with either ‘ No Messages Sent’ or after a short delay the service centre will send a priority message containing a status report. This feature is network dependent.
61
