R290 User’s Guide
3. Press 2 for Ring Volume.
4.Adjust the volume level by using the up and down volume keys or the SOFT keys.
The squares that are filled in indicate the volume level currently set. When the volume level is at its lowest, i.e. silent, none of the squares will be filled in. Each time you adjust the volume level, the current ALERTING TONE will be played at that volume level. Press YES to confirm selection of the required ringing volume. The phone will then return to the Call Setup Menu.
Escalating Ring Volume
To access the Escalating Ring Volume menu.
1.Press SOFT LEFT, 1, 1 to enter Call Setup menu.
2.Press 2 to show Ring Tone menu.
3.Press 3 for Escalating Ring Volume.
4.To enable the escalating ring volume, press 1 or YES. To disable it, press 2. A confirmation message will be displayed before returning to the Call Setup menu.
Caller ID
To access the Caller ID menu.
1.Press SOFT LEFT, 1, 1 to enter Call Setup menu.
2.Press 3 to show Caller ID menu.
3. To enable Caller ID, press 1 or YES. To disable it, press 2.
NOTE:
If the calling number matches a number in the phone book stores, the associated alphanumeric name will also be shown on the display. This display will remain until the call is answered or rejected.
Connect ID
To access the Connect ID menu.
1.Press SOFT LEFT, 1, 1 to enter Call Setup menu.
2.Press 4 to show Connect ID menu.
3. To enable Connect ID, press 1 or YES. To disable it, press 2.
A confirmation message will be displayed before the phone returns to the Call Setup menu.
32
