To Setup the Unit Time for Calls | Ericsson R290 instruction

R290 User’s Guide

4.Enter the unit cost. An example of how this should be entered is 2, 5, 0, 0 for the unit charge of £2.50.

5.Press SOFT LEFT to move the cursor to the Currency field and select a currency using the <* or #> key. If you do not change the default currency, the phone will use that indicated by the current SIM.

6.Once the cost and currency information has been entered, press YES. You may be prompted for the SUPER PIN if you are using a Phase 2 SIM, or the PHONE PIN if you are using a Phase 1 SIM.

NOTE:

If the SUPER PIN is entered incorrectly three times, the message ‘Super PIN Blocked’ will be given and all SUPER PIN protected features will become inaccessible. If the PHONE PIN is entered incorrectly three times, the message ‘ Call Rate Change Disabled’ will be given.

After the requested PIN has been entered correctly, the confirmation message ‘Request Accepted’ will be given before returning to stand-by.

Once the PIN has been accepted, the message Request Accepted will be given before the phone returns to the stand-by display.

If the unit time and cost have been set up and if Advice of Charge has been subscribed to, it will be used in preference.

If you are only subscribed to Advice of Charge Charging (AOCC) but the network you are using does not support it you will not be able to make chargeable calls.

If the maximum number of units has been reached (the Accumulative Call Meter Maximum), you will be unable to make chargeable calls. If you are currently in an outgoing chargeable call, this will be shut down.

If the unit cost has not been set up, the total number of call units will still be stored so that the unit cost may be added later in order to calculate the costing information.

If the unit cost is replaced, the cost of all units will be re-calculated.

Call meters may be reset, but if a Phase 1 SIM is being used, they are Phone PIN protected, or if a Phase 2 SIM is being used, they will be Super PIN protected.

To Setup the Unit Time for Calls

1. Press SOFT LEFT, then 2, to enter the Call Time Menu.

2. Press 4 to display the Cost Setup menu.

28

Image 36

Ericsson R290 manual To Setup the Unit Time for Calls

Contents

Ericsson R290 Satellite Innovatron Patents Safety Instructions Product Care and MaintenanceGuidelines for Safe and Efficient Use Driving Electronic DevicesAircraft Blasting Areas Battery Information Recycling Your Battery Please note Contents Warranty Introduction About Your Phone Globalstar/GSMOperators & Subscriptions SIM Card Phone Preparing Your Phone for Use Operating Without a SIM CardInserting the SIM Card Battery Charging the Battery R290 User’s Guide Disconnecting the Charger When to Charge the BatteryLow Battery Alarm Antenna Use with Portable Hands Free Globalstar Mode Use with Mobile Office Globalstar ModeTurning On the Phone Turning Off the Phone Display Text and Symbols Navigating the Menu SystemTerms Used Indicators in the Display Icon Function Initial Phone Settings Searching for a Network Selecting a Network Stand-by display Making and Receiving Calls Receiving a Call Answering a CallRejecting a Call Calling Line Identification CLI Handling Two Calls Useful Information while Talking To Change the Ring Volume To Change Key Tone VolumeUsing Auto-Redial To Redial the Last Dialled Number Missed Calls Making/Answering a Call with Call Bar ActiveNotification that a Call has been Diverted To dial the last 10 numbers dialled, received or missed Using the Phone Book About the Phone BookInternational Numbers Speed Dialling Upper Case Mode To Store a Name and a Number into a Selected Memory Store Lower Case Mode To Store Your Own Telephone Number To Edit a Number from Memory Store To Display your Own Telephone Number Last Number StoresDialled Store Last Number Redial Pause DiallingReceived Store Missed Store Sending Dtmf Tones During a Call One-Touch DiallingCall Duration and Cost Last Call To Reset the Call Time/Cost Counters Call Cost SetupAll Calls To Setup the Unit Time for Calls To set the maximum cost ‘ Cost Limit Approaching’ being displayed Personalizing Your Phone Busy Numbers Ring Volume Ring ToneTo Complete a Ccbs Call Escalating Ring Volume Caller IDConnect ID Automatic Display of Call Time Auto AnswerGreetings Clock Clock Mode Date ModeSet Time Set Date Satellite Synchronisation Mode Language ModeLanguage To Choose a Language Power Save Visual Indicator UsageBacklight Operation Handsfree Automatic Shutdown Timer Fixed Dialled Number StoreVoice Mail Setting the Keypad Lock Protecting Your PhoneAbout Locks To Enable the Phone PIN Phone Lock PINTo unlock the keypad To Disable the Phone PIN Unblocking with Personal Unblocking Key PUKTo Change the Phone PIN To Enable the SIM PIN Lock Card Lock SIM PINTo change the SIM PIN To Disable the SIM PIN Lock Controlling Your CallsCall Divert To Review the Call Divert Status To Setup Call Divert Call Waiting Notification that a Call has been DivertedTo Remove Call Diversion To Cancel Call Waiting To Check the Call Wait StatusTo Set Call Waiting Switching between Active Call and Call on Hold Dealing with Multiple CallsCall Waiting In-Call Menu Placing a Second Call and holding the Current Call Placing a Call when the Called Party is Engaged Conference CallsCall Termination by Calling Party with another Call Held To Create a Conference Call To Review the Participants in a Conference Call Call Control Public MMI Commands Summary To Disconnect a Remote Party from a Conference CallCall Hold and Call Termination by a Remote Party Remote Party Notification Call Barring To Check the Call Bar Status To Set Outgoing Call Barring To Set Incoming Call Barring To Cancel Outgoing Call Barring To Cancel Incoming Call Barring To Change the Network Password for Call Barring Quick access to unread messages Sending And Receiving Text MessagesReceiving a Message Checking Subscription To Read a Message Deleting a MessageSaving and Dialling a Number Received in a Message To Select Message Tones Clearing Messages Automatically Displaying Priority Messages Immediately Sending a MessageTo Originate a New Message To Enter the Service Centre Number To Enter Message TextTo Enter the Destination Address To Enter the Validity Period To Select the Message TypeTo Review Your Newly Created Message To Create a Message from an Existing Message To Send the Completed Message To Save a MessageTo Return to the Current Message and complete it To Delete a Message To Set the Message Parameter Defaults To Check on the Status of the Last Message Sent Warranty Our WarrantyWhat We Will Do Conditions Patents R290 User’s Guide Index PIN