Ericsson R290 Call Waiting, Notification that a Call has been Diverted, To Remove Call Diversion

R290 User’s Guide

accompanied by the RADIO PATH ACKNOWLEDGEMENT TONE in the earpiece.

The phone will then return to the stand-by display. It is possible to have more than one call diversion option set at any one time, i.e. each option can be set and cancelled individually (including Divert All Calls).

Notification that a Call has been Diverted

The network may inform the relevant parties when a call has been diverted and the RADIO PATH ACKNOWLEDGEMENT TONE will be played.

If the incoming call information includes a Calling Line Identification Presentation (CLIP) number, this will be displayed before the notification that a call has been diverted.

A notification message may also be sent if call diversion is active when an outgoing call is made. The display will show:

To Remove Call Diversion

1.Press SOFT LEFT, 5 to enter Advanced menu.

2.Press 1 for Divert menu.

3.Press 3 for Cancel.

4.Press 1 or YES to cancel divert all calls, 2 to cancel divert a call when the phone is engaged, 3 to cancel divert incoming calls if you are not available, 4 to cancel divert incoming calls when the phone is switched off.

5.Select the basic service group for which the call diversion is to be cancelled. The display will show:

6.Press 1 for All Calls, 2 for Voice Only, 3 for Data Only or 4 for Fax Only.

7.The display will show the message ‘Please Wait’ and then ‘ Request Accepted’ will be displayed. The RADIO ACKNOWLEDGEMENT TONE will be played through the earpiece. The phone will then return to the stand-by display.

Call Waiting

Call Wait is a network subscription option which allows an incoming call to be held waiting when you are already in a call. If this option is not available or not activated, new calls trying to reach you when you are busy will be rejected and there will be no notification that you were being called.

Call Hold is a network subscription option that allows a call to be placed on hold when accepting a waiting call, or to start a new outgoing call. If the network allows, the party being placed on hold may be sent notification that their call is being put on hold. The notifications may be an audible announcement and the message On hold will be displayed on the screen. The calling party may also be sent notification when the call becomes active again.

You can retrieve a call from hold if the active call has ended or the active and held calls are switched.

44