INTRODUCTION
Purpose
INTRODUCTION
PURPOSE
This manual is used for programming office data and for designing the system layout required for customizing the NEAX2000 IVS2.
Before starting installation work, the installer must fill in the office data sheet and draw the system layout and floor layout in this manual according to customer’s requirements. In the course of this work, the installer should use the Office Data Programming Manual, Command Manual and Installation Procedure Manual.
OUTLINE OF THIS MANUAL
This manual consists of the following chapters:
CHAPTER 1 CUSTOMIZING OFFICE DATA
This chapter explains how to customize the office data and contains the customer specifications sheets for numbering plan, station data and trunk data, port assignment table, etc.
CHAPTER 2 DATA PROGRAMMING SHEET
This chapter contains the office data sheets for programming the customer specifications in Chapter 1. For the detailed information about the commands, refer to the Command Manual.
NEAX2000 IVS2 Office Data Programming Manual | Page 1 |
