NEC NEAX2000 IVS2 manual Dial Pulse Telephone set, Dtmf Telephone set, Term

CHAPTER 1 CUSTOMIZING OFFICE DATA

How to Customize Office Data

• Type of Telephone

The type of station telephone set is specified as follows:

TYPE OF TEL	DESCRIPTION
DP	Dial Pulse Telephone set
PB	DTMF Telephone set
Dterm	Dterm set

•SERVICE CLASS-A/B/C

Specify the service class (1-15) programmed in the Service Restriction Data Table.

•RESTRICTION CLASS-DAY/NIGHT

Specify the Trunk Restriction Class as follows:

1:Unrestricted

2:Non-Restricted-1

3:Non-Restricted-2

4:Semi-Restricted 1

5:Semi-Restricted 2

6:Restricted 1

7:Restricted 2

8:Fully-Restricted

•DIT TRUNK NUMBER

In the case of the Direct-In Termination (DIT) station, specify the trunk number connected.

Trunk Data

In Trunk Data Table (Table 1-3), the following data is required:

•ACCESS NUMBER

Specify the access code for the trunks.

•DESTINATION

Specify the distant office such as Central Office (Public Exchange), Tie Line, etc.

NEAX2000 IVS2 Office Data Programming Manual	Page 7
ND-70931 (E), Issue 2.0