CHAPTER 1 CUSTOMIZING OFFICE DATA

How to Customize Office Data

NUMBER OF LINE

Specify the number of trunks to be provided with each route Incoming (IC), Outgoing (OG), Bothway (BW)

DP/PB

Specify the type of address signal from/to distant office, as follows:

TYPE OF TEL

 

DESCRIPTION

DP

Dial Pulse

PB

DTMF Signal

KIND OF SIGNAL

Specify the kind of signaling system such as Ring Down, Loop, E & M, etc. at the line.

Station Hunting Group Data

In Station Hunting Group Data Table (Table 1-4), the following data is required:

KIND OF STATION HUNTING

Specify the kind of the Station Hunting System (Pilot/Circular/Switch Back). For the Pilot System, specify the Pilot Station number.

SECRETARY STATION

Specify the Secretary Station number, if provided.

STATION NUMBER

Specify the station numbers to be assigned to the Station Hunting Group with the following conditions.

(1)Up to 60 stations can be assigned per Station Hunting Group.

(2)There is no limitation to the number of Station Hunting Group.

(3)The same one station cannot be assigned to multiple Hunting Groups.

Page 8

NEAX2000 IVS2 Office Data Programming Manual

ND-70931 (E), Issue 2.0

Page 21
Image 21
NEC NEAX2000 IVS2 manual Dial Pulse, Dtmf Signal, Specify the Secretary Station number, if provided