Monitor OUT | NEC NP2150, NP1150 guide

2. Installation and Connections

Connecting an External Monitor

COMPUTER 1 IN (or COMPUTER 2 IN / COMPONENT IN)

USB(LAN)

	WIRELESS	AUDIO OUT
	WIRELESS
WIRELESS	MONITOR OUT
	MONITOR OUT

Audio cable (not supplied)

VGA signal cable (not supplied)

Audio cable (not supplied)

VGA signal cable (supplied)

AUDIO

IN

phONE

You can connect a separate, external monitor to your projector to simultaneously view on a monitor the RGB analog or component image you’re projecting.

NOTE:

•Daisy chain connection is not possible.

•The MONITOR OUT connector will output no video signal (Digital signal) from the COMPUTER 3 (DVI-D) IN connector.

•When audio equipment is connected, the projector speaker is disabled.

•When [NORMAL] is selected from [STANDBY MODE], the MONITOR OUT connector outputs the last displayed video signal and the AUDIO OUT jack outputs the last audio signal. The sound level remains the same as the last one.

•Selecting [POWER-SAVING] in [STANDBY MODE] stops outputting a video signal from the MONITOR OUT connector during standby mode. This causes the AUDIO OUT jack to stop outputting sound.

15

Image 29

NEC NP2150, NP1150 user manual Installation and Connections Connecting an External Monitor, Monitor OUT

Contents

NP3150/NP2150/NP1150 Information on USB Wireless LAN DOC Compliance Notice for Canada only Safety CautionsPrecautions Important Information Disposing of your used product Installation Important SafeguardsIii Important Information RF Interference for USA only Important Information Fire and Shock Precautions Lamp Replacement Remote Control PrecautionsLamp Characteristic Important Information USB Wireless LAN Unit Important Information About High Altitude modeFCC Compliance Regulatory Information/Disclaimers Vii Viii Table of Contents Table of Contents Using On-Screen Menu  Using the Menus Installation Xii  What’s in the Box? Introduction  Introduction to the Projector Features you’ll enjoyIntroduction Congratulations on Your Purchase of the Projector Preventing unauthorized use of the projector About this user’s manual Rear  Part Names of the ProjectorFront/Top Carrying the Projector Introduction Bottom Introduction To lock the carrying handle Lights when a USB memory is inserted into the USB port Introduction Top Features Introduction Terminal Panel Features Flashes when any button is pressed  Part Names of the Remote ControlLaser Pointer Infrared Transmitter Remote jack → Operating Range for Wireless Remote Control Introduction Battery Installation Remote Introduction Using the Remote Control in Wired Operation 200 Connecting Your PC or Macintosh Computer Installation and Connections Making Connections Enabling the computer’s external display What is HDCP/HDCP technology? Monitor OUT Installation and Connections Connecting an External Monitor Component Video cable not supplied Picture transmission feature Using WindowsVista Installation and Connections Connecting to a NetworkProjector control feature Example of wired LAN connection Installation and Connections Example of LAN connection Example of wireless LAN connection Network Type → Ad Hoc About Direct Power Off Remove the lens cap  Turning on the Projector Press the Enter button to execute the selection Projecting an Image Basic OperationTo select a menu language, follow these steps  Selecting a Source Detecting the Signal AutomaticallyUsing the Remote Control  Adjusting the Picture Size and Position Do not over rotate it or it may break Rotate the lens shift dial Rotate the focus ring to make focus adjustment Finely adjusting the size of an image Zoom lever Lift the front edge of the projector Projecting an Image Basic Operation Adjusting the Tilt Foot  Correcting Keystone Distortion Projecting an Image Basic Operation  Optimizing an RGB Image Automatically  Adjusting Volume Up & DownAdjusting the Image Using Auto Adjust Switch  Using the Laser PointerSetting the function switch  Turning off the Projector Preparation Make sure that the main power is turned off After Use To turn off the projector  Enlarging and Moving a Picture  Turning Off the Image and Sound Freezing a Picture Convenient Features  Changing Lamp ModePress the Help button on the remote control  Getting Integrated Help Mouse Cursor  Using a USB MouseOperate the Menus using the USB mouse Connecting the remote mouse receiver to your computer  Using the Optional Remote Mouse Receiver NP01MRWhen operating a computer via the remote mouse receiver When connecting using the USB port Point on your computer About Drag ModeMoves the mouse cursor on your computer Works as the mouse left button Press the 3D Reform button twice Cornerstone Confirmation screen is displayed Adjustable ranges for 3D Reform are as follows From the menu you can select Setup → Basic → PIP Using Picture in Picture PIP Function Press the PIP button again to display the main picture only Press the PIP button on the remote controlViewing a sub picture in the main picture Assigning a Keyword for the first time  Preventing Unauthorized Use of the Projector Convenient Features Convenient Features Press the Menu button Checking If Security is enabledPress the Power ON/STANDBY button Convenient Features Disabling the Security Account can access the Basic menu  Limiting Access Level to Available Menu ItemsFrom the menu, select Setup → Basic → Logoff Select YES Logging On Select Create Convenient Features Creating or Adding a UserEnter a user name, user type, and password Deleting a User Change the settings and select OKSelect a user name you wish to edit Select Edit Select a user name you wish to delete Select Delete Overview Operation Using an Http BrowserPreparation Before Use Handling of the Address for Operation via a Browser Convenient Features Structure of the Http Server Displays the remaining life of the lamp as a percentage Switches to a LAN signalDisplays how many hours the lamp has been used Displays how many hours the filter has been used Windows Vista should be satisfied Changing the resolution of Windows Vista screen to 1024 xOperation Environment Click Yes Setting the Projector to Network Projector Input ModeClick OK Click NP3150 Series Projecting the Image with Network ProjectorClick → Search for a projector recommended Click Connect Exiting the Network Projector Operation Remote Desktop Using the Projector to Operate Your Computer via a Network Checking the IP address on Windows Vista Setting the Remote Access Starting the Remote Desktop TIP Convenient Features Exiting the Remote Desktop  Saving data to a USB memory device  Making the Most out of the Viewer Function  Operating the Viewer Function from the Projector playback Using the ViewerProjecting slides Viewer Operating Viewer Menu Thumbnail screen Thumbnails menu Using the Viewer Setting Option for Viewer Using the Viewer Exiting Viewer  Changing Background Logo Changes are stored until you adjust it again  Using the Menus Entering alphanumeric characters by using Software Keyboard Using On-Screen Menu Using Advanced menu and Basic menuWhen using the remote control When using the mouse  Menu tree Using On-Screen Menu Ceiling REAR, Desktop REAR, Ceiling Front  Menu Elements  Menu Descriptions & Functions Source Displays a list of signals. →Computer 1 Computer 3 RGB Digital Copy Using On-Screen Menu Entry List Using the Entry ListEntering the Currently Projected Signal into the Entry List Input Terminal Source NameLock Skip Picture Mode  Menu Descriptions & Functions AdjustPreset Saves all the settings of Picture for each input Standard color values Using On-Screen Menu Detail SettingsCreates a high-contrast picture Natural Natural reproduction of the picture Black Detail Brightness ResetSharpness Color Use Phase only after the Clock is complete This allows you to manually adjust Clock and PhaseEvident when part of your image appears to be shimmering Selecting Overscan Percentage Overscan Adjusts the image location horizontally and verticallySelect overscan percentage 0%, 5% and 10% for signal For RGB Using On-Screen Menu Selecting Aspect Ratio Aspect RatioFor Video Video Using Noise Reduction Noise Reduction Enabling 3D Surround 3D Surround Adjusting Contrast Enhancement Contrast EnhacementSound Controlling Sound Volume/Bass/Treble/Balance Basic Selecting Keystone Mode Keystone  Menu Descriptions & Functions Setup Using the PIP Function Using On-Screen Menu Selecting Cornerstone Mode Cornerstone Setting Lamp Mode to Normal or Eco Lamp Mode Setting Mouse Pointer, Button and Sensitivity Mouse Using On-Screen Menu Using Off Timer Off Timer Selecting Menu Language Language Using On-Screen Menu Logging Off Your Projector Logoff Selecting Menu Display Time Menu Display Time Using On-Screen Menu Selecting Menu Color Color SelectSelecting a Color or Logo for Background Background Selecting Interval Time for Filter Message Filter MessagePage Screen Type Selecting Aspect Ratio and Position for Screen ScreenRatio Position To assign your password Setting a Password Logo LockThis option turns on or off the Control Panel Lock function Entry See To delete your password Using On-Screen Menu Security Page Information on the USB memory device will be deleted Security will not be disabled by using ResetTo delete USB memory data you registered To select a wireless LAN access point Hints on How to Set Up LAN Connection General 100 101 Using On-Screen Menu Projector NameUsing Software Keyboard Subnet Mask 102Gateway Type in 12 numeric characters Type and SECURITY. See the Advanced menu later on 103 104 Advanced menu Connection required for wireless only 105 Security required for wireless onlyUses 64-bit datalength for secure transmission Compared to use of 64-bit datalength encryption Domain Using Software Keyboard to enter an encryption key106 Mail 107 Power indicator Orange light/Status indicator Off Selecting Power-saving in Standby Mode108 Turning On or Off Remote Sensor Remote Sensor Enabling High Speed Fan Mode Fan Mode Enabling Power Management Power Management109 Enabling Auto Start Auto Start Setting Monitor OUT Connector OUT Terminal Selecting Signal Format Signal SelectTOR OUT connector 110 Usage Time  Menu Descriptions & Functions Info111 112 Using On-Screen Menu SourceInput Terminal Signal Type Video Type Source Name Entry No Indicates the MAC address of the LAN port RJ-45 Indicates the MAC address of the USB Wireless LAN unit113 114 115  Menu Descriptions & Functions Reset To clean the air-filter  Cleaning or Replacing the Filter116 To replace the filter sponge Maintenance  Cleaning the Cabinet and the Lens117 Slip the filter cover back until it snaps into place To replace the lamp  Replacing the Lamp118 119 120 Example Distance from a 100 screen with the lens NP03ZL 121 122  Lens Shift Adjustable RangeUsing Optional Lenses 123  Replacing with Optional LensRemove the existing lens from the projector Existing lens will be disengaged Using the anti-theft screw to prevent theft of the lens Using Optional Lenses Install the new lens124 Insert the lens with the yellow protrusion on top 125  TroubleshootingIndicator Messages For more information contact your dealer 126Appendix 127 128  SpecificationsOptical Electrical 129 USB Wireless LAN UnitMechanical For United States, Canada, and Mexico For other countries except United States, Canada and Mexico 130 Supported Countries 131 Unit mm/inch  Cabinet Dimensions132 133 Using the Chart Screen Size and Projection Distance List of Screen Sizes 134 Mini D-Sub 15 Pin Connector  Pin Assignments of D-Sub Computer 1 Input ConnectorPin No RGB Signal Analog YCbCr Signal 135 136  Compatible Input Signal ListImages above flagged with D are supported by digital signal 137  PC Control Codes and Cable ConnectionPC Control Codes Cable Connection 138 Appendix PC Control Connector D-SUB 9P 139 Removing and Attaching the USB Wireless LAN Unit Tighten the two screws 140 Power Troubleshooting Check List141 Video and Audio Installation environment Signal cable142 Computer 143 TravelCare Guide Asia and Middle East 144 Company & Name with signature 145 146 Condition of your TravelCare Service Program