NEC NP2150, NP1150, NP3150 setup guide Setting Wired LAN, Display the Wired page of Network Settings

4. Setting the LAN Setting of Projector

■Setting Wired LAN

1Display the “WIRED” page of “NETWORK SETTINGS”.

Configure the setting of wired LAN in the “WIRED” page of “NETWORK SETTINGS” selected from On-Screen Menu. If “NETWORK SETTINGS” is not displayed, refer to “4-1. Displaying On-Screen Menu (NETWORK SETTINGS)” (page 17).

2Select “PROFILES”.

“PROFILE 1” or “PROFILE 2” can be stored in the memory of the projector as the setting of LAN.

<1>	Press the SELECT	button once to highlight the “PROFILES” field and press the
	button.
<2>	Use the SELECT /	button to highlight “PROFILE 1” or “PROFILE 2”, and press the
	button.

3Set “DHCP”.

Follow the same procedure as in “4-2. Wireless LAN” ( page 19).

4Input “IP ADDRESS”, “SUBNET MASK”, and “GATEWAY”.

Follow the same procedure as in “4-2. Wireless LAN” ( page 19,20).

5Input “DNS CONFIGURATION”.

Follow the same procedure as in “4-2. Wireless LAN” ( page 20).

6Reconnect the network.

<1> When all the above items have been input or set, use the SELECT / button to highlight

“RECONNECT” and press the button.

7Finalize the setting.

<1> Use the button to highlight [OK] and press the button. The setting will be stored in the memory of the projector.

4

Setting the LAN Setting of Projector

29