NEC NP901W user manual 116, Selecting Signal Format Signal Select, Selecting Color System

6. Using On-Screen Menu

Selecting Default Source [Default Source Select]

You can set the projector to default to any one of its inputs each time the projector is turned on.

Last	Sets the projector to default to the previous or last active input each time the projector is turned on.
Auto	Searches for an active source in order of Computer1 → Computer2 → HDMI → Video → S-Video
	→ Viewer → Computer1 and displays the first found source.
COMPUTER 1	Displays the RGB source from the COMPUTER 1 IN connector every time the projector is turned on.
COMPUTER 2	Displays the RGB source from the COMPUTER 2 IN connector every time the projector is turned on.
HDMI	Displays the digital source from the HDMI IN connector every time the projector is turned on.
VIDEO	Displays the Video source from the VIDEO IN connector every time the projector is turned on.
S-VIDEO	Displays the Video source from the S-VIDEO IN connector every time the projector is turned on.
VIEWER	Displays slides or plays back movie files from the USB memory device every time the projector is turned
	on.
NETWORK	Displays a signal from LAN port (RJ-45) or the USB Wireless LAN Unit.

Selecting Signal Format [Signal Select]

Computer 1/2

Allows you to set [Computer 1] and [Computer 2] to automatically detect an incoming RGB or component source such as a computer or DVD player. However there may be some RGB and component signals that the projector is unable to detect. In this case, select [RGB].

Selecting [Color System]

This feature enables you to select video standards manually.

Normally select [AUTO]. Select the video standard from the pulldown menu. This must be done for Video and S-Video Connectors separately.

Setting HDMI [HDMI SETTINGS]

Make the settings for video level and audio level when connecting HDMI equipment such as a DVD player.

VIDEO LEVEL	Select [NORMAL] to disable the [ENHANCED] feature of your HDMI equipment. Select [ENHANCED] to
	improve image contrast and increase detail in the dark areas.
AUDIO SELECT	Select [HDMI] to switch the HDMI IN digital audio signal and select [COMPUTER 2] to switch the COM-
	PUTER 2 input audio signal.

Setting MONITOR OUT Connector [OUT Terminal]

This option allows you to determine which RGB or component source is output from the MONITOR OUT and the AUDIO OUT connectors during Standby mode.

Last	The video and audio signal from the last COMPUTER 1 or COMPUTER 2 input will be output to the MONI-
	TOR OUT connector.

Computer 1, 2..... The video and audio signal from the COMPUTER 1 or COMPUTER 2 input will be output to the MONITOR

OUT connector.

116