NEC NP901W  Selecting a Source, Detecting the Signal Automatically, Using the Remote Control

3. Projecting an Image (Basic Operation)

Selecting a Source

Selecting the computer or video source

Selecting from Source List

Press and quickly release the SOURCE button on the projector cabinet to dis- play the Source list. Each time the SOURCE button is pressed, the input source will change as follows: “Computer 1/2”, “HDMI”, “Video” (VCR), “S-VIDEO”, “VIEWER” (slides on a USB memory) or “NETWORK” (LAN port [RJ-45] or in- stalled USB wireless LAN unit).

To display the selected source, press the ENTER button.

Detecting the Signal Automatically

Press and hold the SOURCE button for a minimum of 1 second, the projector will search for the next available input source. Each time you press and hold the SOURCE button for a minimum of 1 second, the input source will change as fol- lows:

Computer1 → Computer2 → HDMI → Video → S-Video → Viewer →

Computer1 → ...

If no input signal is present, the input will be skipped. When the input source you wish to project is displayed, release the button.

Using the Remote Control

Press any one of the COMPUTER 1/2, HDMI, VIDEO, S-VIDEO, VIEWER or NETWORK buttons.

USB

LAMP

STATUS

REFORM AUTO ADJUST SOURCE

USB

LAMP

STATUS

REFORM AUTO ADJUST SOURCE

OFFON

	POWER
	COMPUTER	AUTO ADJ.
1	2	3
VIDEO	S-VIDEO	COMPONENT HDMI
VIEWER	NETWORK	PIP

1 2 3

4 5 6

7 8 9

24