NEC NP901W  Correcting Keystone Distortion, Auto Keystone Correction, Manual Keystone Correction

3. Projecting an Image (Basic Operation)

Correcting Keystone Distortion

When the projector is not exactly perpendicular to the screen, keystone distortion occurs. To overcome it, you can use the “Keystone” function, a digital technology that can adjust for keystone-type distortion, resulting in a crisp, square image. The following procedure explains how to use the [Keystone] screen from the menu to correct trapezoidal distortions.

When the projector is set up at an angle in relation to the screen, adjust the Horizontal option of the Keystone menu so that the top and bottom of sides of the projected image are parallel.

Auto Keystone Correction

The Auto Keystone correction feature will correct vertical distortion of a projected image on the screen. No special operation required. Just put the projector on a flat surface.

To use the Auto Keystone function, first you must select [AUTO KEYSTONE] in [KEYSTONE] from the menu.

Manual Keystone Correction

1.Press the 3D REFORM button on the remote control or the projec- tor cabinet.

The Keystone screen will be displayed on the screen.

Projected area

Screen frame

2.Press the SELECT  button to select [Vertical] and then use the SELECT  or  so that the left and right sides of the projected im- age are parallel.

*Adjust the vertical keystone distortion.

3.Align the left (or right) side of the screen with the left (or right) side of the projected image.

• Use the shorter side of the projected image as the base.

• In the right example, use the left side as the base.

Align left side

4.Press the SELECT  button to select [Horizontal] and then use the SELECT  or  so that the top and bottom sides of the pro- jected image are parallel.

• Adjust the horizontal keystone distortion.

28