NEC NP901W Introduction Bottom, Carrying the Projector, Attaching the supplied carrying handle

1. Introduction

Bottom

Filter cover (Rear [REAR]) (→ page 123)

Filter cover (Front [FRONT]) (→ page 123)

NOTE: “FRONT” and “REAR” are inscribed inside the filter cover.

Screw hole for attaching the carrying handle (two locations)

Rear Foot

(→ page 27)

Lamp Cover (→ page 125)

Carrying the Projector

Always carry your projector by the handle.

Ensure that the power cable and any other cables connecting to video sources are disconnected before moving the projector.

When moving the projector or when it is not in use, cover the lens with the lens cap.

Attaching the supplied carrying handle

You can carry the projector by attaching the supplied carrying handle securely to the projector.

To attach the supplied carrying handle, use a Phillips-head screwdriver and the supplied two screws.

Place a soft cloth on the working surface before turning the projector over to prevent scratching the top cover. Make sure that the carrying handle is attached with correct orientation as shown below.

Phillips-head screwdriver

(not supplied)

Screw

Carrying handle

CAUTION

• When carrying the projector by the carrying handle, make sure the two screws that attach the carrying handle to the projector cabinet are tight.

• Use the supplied lens cap to protect the lens surface when carrying the projector.